Poulan PP300E instruction manual Chain Adjustment, Customer Serviceable Parts, Seasonal Storage

SPlace chain around the sprocket and fit the drive links into the guide bar groove and then around guide bar nose.

S Hold the guide bar against the saw frame and install the bar clamp.

Be sure adjusting pin is in the adjusting pin hole in the bar.

Inside view of

Bar Clamp Adjusting pin hole

Adjusting screw

Adjusting pin

S Secure the guide bar and bar clamp plate with the bar nuts; tighten finger tight only.

CAUTION: If saw chain is installed back- wards, the saw will vibrate excessively and will not cut wood.

CHAIN ADJUSTMENT

See CHECK CHAIN TENSION in the MAIN-

TENANCE section.

CUSTOMER SERVICEABLE PARTS

WARNING: Use of any other ac- cessory or attachment might present a risk of injury to the operator.

REPLACEMENT PART	PART NO.
Hex Nuts	530015917
Oil Cap	530053072
Bar Adjusting Screw	530016265
Bar Adjusting Pin	530053068
File (5/32” dia.) Twin Pak	952055085
Xtra GUARDr Chain --14”	952051469
Xtra GUARDr Chain --16”	952051470
Lo--KickrGuide Bar -- 14”	952044758
Lo--KickrGuide Bar -- 16”	952044759
Bar & Chain Lubricant --1 qt	952030203
Bar & Chain Lubricant --1 gal	952030204

WARNING: Perform the following steps after each use:

S Allow motor to cool before storing or transporting.

SStore chain saw and extension cord in a well ventilated area

SStore chain saw with all guards in place and position chain saw so that

any sharp object cannot accidentally

cause injury.

SStore chain saw unplugged, well out of the reach of children.

SEASONAL STORAGE

Prepare your unit for storage at the end of the season or if it will not be used for 30 days or more.

If your chain saw is to be stored for a period of time:

SClean it thoroughly before lengthy stor-

age.

SStore in a clean dry area.

S Lightly oil external metal surfaces and guide bar.

SOil the chain and wrap it in heavy paper or cloth.

16