Slot
7.With your finger between the lines, wrap the lines evenly and firmly around the spool in a clockwise direction.
8.Position the lines in the guide slots. Guide slot
Guide slot
9.Place the spool in the cover as shown below.
10.Insert the ends of the lines through exit holes in the sides of the cover.
Line exit hole
Cover
11.Reinstall the spool and cover onto the trimmer head. Push until cover snaps into place.
REPLACING THE TRIMMER HEAD
1.Hold the dust cup with a wrench to keep the shaft from turning while removing and installing trimmer head.
Dust Cup
2.Remove trimmer head by turning counter- clockwise (looking from bottom of unit).
3.Thread replacement trimmer head onto the shaft by turning clockwise. Only tighten hand tight!
21
