STORAGE

Immediately prepare your unit for storage at the end of the season or if the unit will not be used for 30 days or more.

WARNING: Never store the snow thrower with gasoline in the tank inside a building where fumes may reach an open flame, spark or pilot light as on a furnace, water heater, clothes dryer or gas appliance. Allow the engine to cool before storing in any enclosure.

SNOW THROWER

When snow thrower is to be stored for a period of time, clean it thoroughly, remove all dirt, grease, leaves, etc. Store in a clean, dry area.

1.Clean entire snow thrower (See “CLEANING” in the Maintenance section of this manual).

2.Inspect and replace belts, if necessary (See “TO RE- PLACE BELTS” in the Service and Adjustments section of this manual).

3.Lubricate as shown in the Maintenance section of this manual.

4.Be sure that all nuts, bolts, screws, and pins are securely fastened. Inspect moving parts for damage, breakage and wear. Replace if necessary.

5.Touch up all rusted or chipped paint surfaces; sand lightly before painting.

ENGINE

See engine manual.

FUEL SYSTEM

IMPORTANT: It is important to prevent gum deposits from forming in essential fuel system parts such as carburetor, fuel hose, or tank during storage. Also, alcohol blended fuels (called gasohol or using ethanol or methanol) can attract moisture which leads to separation and formation of acids during storage. Acidic gas can damage the fuel system of an engine while in storage.

•Empty the fuel tank by starting the engine and letting it run until the fuel lines and carburetor are empty.

•Never use engine or carburetor cleaner products in the fuel tank or permanent damage may occur.

•Use fresh fuel next season.

NOTE: Fuel stabilizer is an acceptable alternative in min- imizing the formation of fuel gum deposits during storage. Add stabilizer to gasoline in fuel tank or storage container. Always follow the mix ratio found on stabilizer container. Run engine at least 10 minutes after adding stabilizer to allow the stabilizer to reach the carburetor. Do not drain the gas tank and carburetor if using fuel stabilizer.

ENGINE OIL

Drain oil (with engine warm) and replace with clean engine oil. (See “ENGINE” in the Maintenance section of this manual).

CYLINDER

1.Remove spark plug.

2.Pour one ounce (29 ml) of oil through spark plug hole into cylinder.

3.Pull recoil starter handle slowly a few times to distribute oil.

4.Replace with new spark plug.

OTHER

•Remove safety ignition key; store it in a safe place.

•Do not store gasoline from one season to another.

•Replace your gasoline can if your can starts to rust. Rust and/or dirt in your gasoline will cause problems.

•If possible, store your snow thrower indoors and cover it to protect it from dust and dirt.

•Cover your snow thrower with a suitable protective cover that does not retain moisture. Do not use plastic. Plastic cannot breathe, which allows condensation to form and will cause your snow thrower to rust.

IMPORTANT: Never cover snow thrower while engine/ex- haust area is still warm.

19

Page 18 Page 20
Page 19
Image 19
Poulan PP414EPS30 owner manual Storage, Other, Fuel System, Engine OIL, Cylinder
Page 18 Page 20

PP414EPS30 specifications

The Poulan PP414EPS30 is a powerful and efficient outdoor power tool designed for homeowners and gardening enthusiasts. This chainsaw boasts a variety of features, technologies, and characteristics that make it an excellent choice for both light and heavy-duty applications.

One of the standout features of the Poulan PP414EPS30 is its robust engine. Equipped with a 40cc engine, it delivers ample power to tackle a range of cutting tasks, whether it's felling trees, trimming branches, or cutting firewood. The engine is designed for easy starting and minimal maintenance, thanks to its spring-assisted recoil starter that simplifies the ignition process.

The chainsaw comes with a 16-inch bar and chain, which strike a perfect balance between cutting capacity and maneuverability. This size allows for efficient cutting without being overly cumbersome, making it ideal for homeowners seeking an easy-to-handle tool for their yard maintenance and clean-up needs.

In terms of safety features, the Poulan PP414EPS30 is equipped with an automatic chain oiler that ensures consistent lubrication while in use, prolonging the life of the bar and chain. Additionally, it features a chain brake that quickly stops the chain in case of kickback, enhancing user safety during operation.

The design of the saw prioritizes user comfort, featuring ergonomic handles for a secure grip and reduced vibrations. This is crucial for prolonged use, allowing users to work comfortably without excessive strain. Furthermore, the lightweight construction of the chainsaw means it can be easily maneuvered, reducing fatigue during extended job sessions.

The Poulan PP414EPS30 also incorporates advanced technology such as the Air Filter System, which enhances engine performance and longevity by providing cleaner air intake. This leads to fewer service intervals and prolonged engine life, making it a cost-effective choice in the long run.

Overall, the Poulan PP414EPS30 offers an impressive combination of power, safety, and user-friendly features. With its reliable engine, suitable bar length, and thoughtful design, it stands out as a versatile chainsaw that meets the demands of both occasional users and serious hobbyists alike. Whether for routine yard work or more demanding tasks, this chainsaw is a reliable partner for outdoor maintenance.
Top Page Image Contents