Manuals / Brands / Lawn and Garden / Tiller / Poulan / Lawn and Garden / Tiller

Poulan PPCRT55 TINE REPLACEMENT (See Figs. 24, 25, and 26)

1 28

Download 28 pages, 1.14 Mb

16

SERVICE AND ADJUSTMENTS

tine_13

FIG. 26

TINE REPLACEMENT (See Figs. 24, 25, and 26)

CAUTION: Tines are sharp. Wear

gloves or other protection when han-

dling tines.

A badly worn tine causes your tiller to work harder and dig

more shallow. Most important, worn tines cannot chop and

shred organic matter as effectively nor bury it as deeply as

good tines. A tine this worn needs to be replaced.

FIG. 25

• To maintain the superb tilling performance of this

ma chine the tines should be checked for sharpness,

wear, and bending, particularly the tines which are

next to the transmission. If the gap between the tines

ex ceeds 3-1/2 inches (9 cm), they should be replaced

or straight ened as necessary.

• New tines should be assembled as shown in Fig.

26. Sharp ened tine edges will rotate rearward from

above.

tine_3

TINE TINE

3-1/2" MAX

(9 CM)

SHARP EDGE

HAIRPIN CLIP

SHARP

EDGES

COUNTER

TINE

ROTATION

02050

SHARP EDGES SHARP EDGE

SHEAR PIN

SHEAR PIN

HAIRPIN CLIP

FIG. 24

NEW TINE WORN TINE

TRANS MIS SION

SHARP

EDGE

Contents

Main MODEL: PPCRT55 MAINTENANCE AND STORAGE - IMPORTANT - SAFETY RULES Safe Operation Practices for Walk-Behind Powered Ro ta ry Tillers TRAINING PREPARATION OPERATION WARNING TABLE OF CONTENTS PRODUCT SPECIFICATIONS TOOLS REQUIRED FOR ASSEMBLY OPERATORS POSITION (See Fig. 1) CONTENTS OF HARDWARE PACK UNPACKING CARTON (See Fig. 2) INSTALL HANDLE (See Figs. 3, 4, and 5) INSERT CABLE CLIP (See Fig. 6) CONNECT SHIFT ROD (See Fig. 7) REMOVE TILLER FROM CRATE CHECK TIRE PRESSURE HANDLE HEIGHT KNOW YOUR TILLER READ THIS OWNER'S MANUAL AND SAFETY RULES BEFORE OPERATING YOUR TILLER. MEETS ANSI SAFETY REQUIREMENTS TURNING HOW TO USE YOUR TILLER STOPPING (See Fig. 9) TINE OPERATION - WITH WHEEL DRIVE FORWARD - WHEELS ONLY/TINES STOPPED REVERSE - WHEELS ONLY/TINES STOPPED BEFORE START ING ENGINE CHECK ENGINE OIL LEVEL (See Fig. 12) ADD GASOLINE OUTER SIDE SHIELDS (See Fig. 11) TO TRANSPORT CULTIVATING TILLING HINTS TINE SHEAR PINS GENERAL RECOMMENDATIONS LUBRICATION CHART BEFORE EACH USE LUBRICATION MAINTENANCE SCHEDULE LUBRICATION AIR FILTER (See Fig. 18) MUFFLER SPARK PLUG TRANSMISSION CLEANING COOLING SYSTEM (See Fig. 19) TILLER TO ADJUST HANDLE HEIGHT (See Fig. 20) TIRE CARE TO REMOVE WHEEL (See Fig. 21) TO REMOVE BELT GUARD (See Fig. 22) TO REPLACE GROUND DRIVE BELT (See Figs. 22 and 23) GROUND DRIVE BELT ADJUSTMENT (See Fig. 23) TINE REPLACEMENT (See Figs. 24, 25, and 26) TO ADJUST THROTTLE CONTROL CABLE (See Fig. 27) TO AD JUST CARBURETOR STORAGE ENGINE OIL CYLINDER(S) OTHER TILLER TROUBLESHOOTING POINTS TILLER - - MODEL NUMBER PPCRT55 (96091001200), PRODUCT NUMBER 960 91 00-12 HANDLE ASSEMBLY MAINFRAME, LEFT SIDE MAINFRAME, RIGHT SIDE TRANSMISSION TINE SHIELD TINE ASSEMBLY DECALS LIMITED WARRANTY PARTS AND SERVICE NOTE: