SERVICE AND ADJUSTMENTS

TO START ENGINE WITH A WEAK BATTERY (See Fig. 28)

WARNING: Lead-acid batteries generate explosive gases. Keep sparks, flame and smoking materials away from bat- teries. Always wear eye protection when around batteries.

If your battery is too weak to start the engine, it should be recharged. (See "BATTERY" in the Customer Responsibili- ties section of this manual).

If “jumper cables” are used for emergency starting, follow this procedure:

IMPORTANT: YOUR TRACTOR IS EQUIPPED WITH A 12 VOLT SYSTEM. THE OTHER VEHICLE MUST ALSO BE A 12 VOLT SYSTEM. DO NOT USE YOUR TRACTOR BATTERY TO START OTHER VEHICLES.

TO ATTACH JUMPER CABLES -

Connect one end of the RED cable to the POSITIVE (+) terminal of each battery(A-B), taking care not to short against tractor chassis.

Connect one end of the BLACK cable to the NEGATIVE (-) terminal (C) of fully charged battery.

Connect the other end of the BLACK cable (D) to good chassis ground, away from fuel tank and battery.

TO REMOVE CABLES, REVERSE ORDER -

BLACK cable first from chassis and then from the fully charged battery.

RED cable last from both batteries.

REPLACING BATTERY (See Figs. 29 and 30)

CAUTION: Do not short battery terminals by allowing a wrench or any other object to contact both terminals at the same time. Before connecting battery, remove metal bracelets, wristwatch bands, rings, etc.

Positive terminal must be connected first to prevent sparking from acciden- tal grounding.

Lift seat pan to raised position.

Disconnect BLACK battery cable first then RED battery cable and carefully remove battery from tractor.

Install new battery with terminals in same position as old battery.

First connect RED battery cable to positive (+) terminal with hex bolt and keps nut as shown. Tighten securely. Slide terminal cover over terminal.

Connect BLACK grounding cable to negative (-) terminal with remaining hex bolt and keps nut. Tighten securely.

SEAT PAN

FIG. 29

WEAK OR DEAD BATTERY

FULLY CHARGED

BATTERY

TERMINAL

KEPS

NUT

COVER

 

HEX

BOLT

FIG. 28

POSITIVE (RED)

NEGATIVE

CABLE

(BLACK) CABLE

FIG. 30

TO REPLACE HEADLIGHT BULB

Raise hood.

Pull bulb holder out of the hole in the backside of the grill.

Replace bulb in holder and push bulb holder securely back into the hole in the backside of the grill.

Close hood.

24

Page 24
Image 24
Poulan PPR20H42STA To Start Engine with a Weak Battery See Fig, Replacing Battery See Figs, To Replace Headlight Bulb

PPR20H42STA specifications

The Poulan PPR20H42STA is a powerful and versatile riding lawn mower designed to tackle a variety of mowing tasks efficiently. This model combines user-friendly features with advanced technology, making it an ideal choice for homeowners with medium to large lawns. One prominent feature of the PPR20H42STA is its robust 20 HP Briggs & Stratton engine, which provides ample power to handle thick grass and uneven terrain. The engine is designed for easy starting and minimal maintenance, ensuring that users can quickly get back to mowing without the hassle of complicated upkeep.

One of the standout characteristics of the Poulan PPR20H42STA is its 42-inch cutting deck. This size strikes a perfect balance between maneuverability and coverage, allowing the mower to navigate tight spaces while efficiently cutting a larger area in fewer passes. The deck's dual blades promote a clean and even cut, contributing to a healthier lawn. Additionally, the deck height is adjustable, offering six different cutting positions to customize the mowing height according to your preferences and grass type.

The PPR20H42STA features a hydrostatic transmission, providing smooth and seamless speed control. This technology allows users to easily change speeds without the hassle of shifting gears, resulting in a more enjoyable mowing experience. The mower's tight turning radius enhances maneuverability, making it easier to trim around flower beds and trees.

Comfort has also been prioritized in the design of the Poulan PPR20H42STA. An ergonomic, high back seat provides ample support during prolonged use, reducing fatigue. The steering wheel and control levers are positioned for easy access, enabling users to operate the mower with minimal effort.

For added convenience, the Poulan PPR20H42STA includes a built-in storage compartment for tools and small items, ensuring that everything needed for lawn care is within easy reach. The mower also showcases a rugged and durable construction, with a strong chassis built to withstand tough conditions.

Overall, the Poulan PPR20H42STA defines reliability and efficiency in lawn care. Its powerful engine, superior cutting capabilities, and user-friendly design make it a valuable addition to any homeowner's landscaping toolkit. Whether you’re mowing grass or navigating uneven terrain, this mower is designed to deliver outstanding performance every time.