OPERATION

•Sitting in the tractor seat, start engine. After the engine is running, move throttle control to slow position. With motion control lever in neutral (N) position, slowly disengage clutch/brake pedal.

•Move motion control lever to full forward position and hold for five (5) seconds. Move lever to full reverse position and hold for five (5) seconds. Repeat this procedure three (3) times.

NOTE: During this procedure there will be no movement of drive wheels. The air is being removed from hydraulic drive system.

•Move motion control lever to neutral (N) position. Shut- off engine and set parking brake.

•Engage transmission by placing freewheel control in driving position (See “TO TRANSPORT” in this section of manual).

•Sitting in the tractor seat, start engine. After the engine is running, move throttle control to half (1/2) speed. With motion control lever in neutral (N) position, slowly disengage clutch/brake pedal.

•Slowly move motion control lever forward, after the tractor moves approximately five (5) feet, slowly move motion control lever to reverse position. After the tractor moves approximately five (5) feet return the motion control lever to the neutral (N) position. Repeat this procedure with the motion control lever three (3) times.

•Your tractor is now purged and now ready for normal operation.

MOWING TIPS

•Mower should be properly leveled for best mowing performance. See “TO LEVEL MOWER HOUSING” in the Service and Adjustments section of this manual.

•The left hand side of mower should be used for trimming.

•Drive so that clippings are discharged onto the area that has been cut. Have the cut area to the right of the machine. This will result in a more even distribution of clippings and more uniform cutting.

•When mowing large areas, start by turning to the right so that clippings will discharge away from shrubs, fences, driveways, etc. After one or two rounds, mow in the opposite direction making left hand turns until finished (See Fig. 10).

•If grass is extremely tall, it should be mowed twice to reduce load and possible fire hazard from dried clip- pings. Make first cut relatively high; the second to the desired height.

•Do not mow grass when it is wet. Wet grass will plug mower and leave undesirable clumps. Allow grass to dry before mowing.

•Always operate engine at full throttle when mowing to assure better mowing performance and proper dis- charge of material. Regulate ground speed by selecting a low enough gear to give the mower cutting perfor- mance as well as the quality of cut desired.

•When operating attachments, select a ground speed that will suit the terrain and give best performance of the attachment being used.

FIG. 10

MULCHING MOWING TIPS

IMPORTANT: FOR BEST PERFORMANCE, KEEP MOWER HOUSING FREE OF BUILT-UP GRASS AND TRASH. CLEAN AFTER EACH USE.

•The special mulching blade will recut the grass clippings many times and reduce them in size so that as they fall onto the lawn they will disperse into the grass and not be noticed. Also, the mulched grass will biodegrade quickly to provide nutrients for the lawn. Always mulch with your highest engine (blade) speed as this will provide the best recutting action of the blades.

•Avoid cutting your lawn when it is wet. Wet grass tends to form clumps and interferes with the mulching action. The best time to mow your lawn is the early afternoon. At this time the grass has dried and the newly cut area will not be exposed to the direct sun.

•For best results, adjust the mower cutting height so that the mower cuts off only the top one-third of the grass blades (See Fig. 11). For extremely heavy mulching, reduce your width of cut on each pass and mow slowly.

•Certain types of grass and grass conditions may require that an area be mulched a second time to completely hide the clippings. When doing a second cut, mow across or perpendicular to the first cut path.

•Change your cutting pattern from week to week. Mow north to south one week then change to east to west the next week. This will help prevent matting and graining of the lawn.

MAX 1/3

FIG. 11

14

Page 13 Page 15
Page 14
Image 14
Poulan PR17H42STC, 178219 owner manual Mulching Mowing Tips
Page 13 Page 15

178219, PR17H42STC specifications

The Poulan 178219, PR17H42STC is a powerful and versatile riding lawn mower designed to meet the needs of homeowners seeking a reliable solution for maintaining their lawns. With a robust build and innovative features, this mower stands out in the competitive market of outdoor power equipment.

One of the main features of the Poulan PR17H42STC is its 17 HP Briggs & Stratton engine, which provides ample power for cutting through thick grass and tackling uneven terrain. The engine is designed for easy starting and reliable performance, ensuring that users can depend on their mower season after season.

The 42-inch cutting deck is another highlight of this riding mower. This size allows for efficient mowing of larger grass areas while still being compact enough to maneuver around garden beds and other landscaping features. The deck is equipped with a dual-blade system, which ensures a clean and even cut, promoting a healthy lawn.

In terms of technology, the Poulan PR17H42STC features a hydrostatic transmission that offers smooth and responsive speed adjustments. This technology allows for effortless acceleration and deceleration, making it easy for users to navigate around obstacles. The mower also includes a tight turning radius, enhancing its maneuverability in tighter spaces.

Comfort and convenience are key considerations in the design of the Poulan PR17H42STC. The adjustable high back seat provides excellent support, allowing users to mow for extended periods without discomfort. The mower also features easy-access controls, including mower engagement and speed controls, which are intuitively placed for user-friendly operation.

Another notable characteristic is the durable construction of the mower. Built with high-quality materials, the Poulan PR17H42STC is designed to withstand the rigors of regular use. Additionally, the mower is equipped with reinforced cutting deck edges, extending its lifespan and ensuring it maintains its performance over time.

With its blend of power, technology, and user-friendly features, the Poulan 178219, PR17H42STC is an excellent choice for homeowners looking to efficiently care for their lawns. Its combination of performance, comfort, and durability makes it a reliable partner for all mowing tasks.
Top Page Image Contents