STORAGE

Immediately prepare your tractor for storage at the end of the season or if the tractor will not be used for 30 days or more.

CAUTION: Never store the tractor with gasoline in the tank inside a building where fumes may reach an open flame or spark. Allow the engine to cool before storing in any enclosure.

TRACTOR

Remove mower from tractor for winter storage. When mower is to be stored for a period of time, clean it thoroughly, remove all dirt, grease, leaves, etc. Store in a clean, dry area.

Clean entire tractor (See “CLEANING” in the Customer Responsibilities section of this manual).

Inspect and replace belts, if necessary (See belt re- placement instructions in the Service and Adjustments section of this manual).

Lubricate as shown in the Customer Responsibilities section of this manual.

Be sure that all nuts, bolts and screws are securely fastened. Inspect moving parts for damage, breakage and wear. Replace if necessary.

Touch up all rusted or chipped paint surfaces; sand lightly before painting.

BATTERY

Fully charge the battery for storage.

After a period of time in storage, battery may require recharging.

To help prevent corrosion and power leakage during long periods of storage, battery cables should be discon- nected and battery cleaned thoroughly (see “TO CLEAN BATTERY AND TERMINALS” in the Customer Respon- sibilities section of this manual).

After cleaning, leave cables disconnected and place cables where they cannot come in contact with battery terminals.

If battery is removed from tractor for storage, do not store battery directly on concrete or damp surfaces.

ENGINE

FUEL SYSTEM

IMPORTANT: IT IS IMPORTANT TO PREVENT GUM DEPOSITS FROM FORMING IN ESSENTIAL FUEL SYSTEM PARTS SUCH AS CARBURETOR, FUEL FILTER, FUEL H O S E , O R T A N K D U R I N G S T O R A G E . A L S O , EXPERIENCE INDICATES THAT ALCOHOL BLENDED FUELS (CALLED GASOHOL OR USING ETHANOL OR METHANOL) CAN ATTRACT MOISTURE WHICH LEADS TO SEPARATION AND FORMATION OF ACIDS DURING STORAGE. ACIDIC GAS CAN DAMAGE THE FUEL SYSTEM OF AN ENGINE WHILE IN STORAGE.

Drain the fuel tank.

Start the engine and let it run until the fuel lines and carburetor are empty.

Never use engine or carburetor cleaner products in the fuel tank or permanent damage may occur.

Use fresh fuel next season.

NOTE: Fuel stabilizer is an acceptable alternative in minimizing the formation of fuel gum deposits during stor- age. Add stabilizer to gasoline in fuel tank or storage container. Always follow the mix ratio found on stabilizer container. Run engine at least 10 minutes after adding stabilizer to allow the stabilizer to reach the carburetor. Do not drain the gas tank and carburetor if using fuel stabilizer.

ENGINE OIL

Drain oil (with engine warm) and replace with clean engine oil. (See “ENGINE” in the Customer Responsibilities section of this manual).

CYLINDER(S)

Remove spark plug(s).

Pour one ounce of oil through spark plug hole(s) into cylinder(s).

Turn ignition key to “START” position for a few seconds to distribute oil.

Replace with new spark plug(s).

OTHER

Do not store gasoline from one season to another.

Replace your gasoline can if your can starts to rust. Rust and/or dirt in your gasoline will cause problems.

If possible, store your tractor indoors and cover it to give protection from dust and dirt.

Cover your tractor with a suitable protective cover that does not retain moisture. Do not use plastic. Plastic cannot breathe which allows condensation to form and will cause your tractor to rust.

IMPORTANT: NEVER COVER TRACTOR WHILE ENGINE AND EXHAUST AREAS ARE STILL WARM.

24

Page 24
Image 24
Poulan PR17H42STC, 178219 owner manual Storage, Other, Fuel System, Engine OIL, Cylinders

178219, PR17H42STC specifications

The Poulan 178219, PR17H42STC is a powerful and versatile riding lawn mower designed to meet the needs of homeowners seeking a reliable solution for maintaining their lawns. With a robust build and innovative features, this mower stands out in the competitive market of outdoor power equipment.

One of the main features of the Poulan PR17H42STC is its 17 HP Briggs & Stratton engine, which provides ample power for cutting through thick grass and tackling uneven terrain. The engine is designed for easy starting and reliable performance, ensuring that users can depend on their mower season after season.

The 42-inch cutting deck is another highlight of this riding mower. This size allows for efficient mowing of larger grass areas while still being compact enough to maneuver around garden beds and other landscaping features. The deck is equipped with a dual-blade system, which ensures a clean and even cut, promoting a healthy lawn.

In terms of technology, the Poulan PR17H42STC features a hydrostatic transmission that offers smooth and responsive speed adjustments. This technology allows for effortless acceleration and deceleration, making it easy for users to navigate around obstacles. The mower also includes a tight turning radius, enhancing its maneuverability in tighter spaces.

Comfort and convenience are key considerations in the design of the Poulan PR17H42STC. The adjustable high back seat provides excellent support, allowing users to mow for extended periods without discomfort. The mower also features easy-access controls, including mower engagement and speed controls, which are intuitively placed for user-friendly operation.

Another notable characteristic is the durable construction of the mower. Built with high-quality materials, the Poulan PR17H42STC is designed to withstand the rigors of regular use. Additionally, the mower is equipped with reinforced cutting deck edges, extending its lifespan and ensuring it maintains its performance over time.

With its blend of power, technology, and user-friendly features, the Poulan 178219, PR17H42STC is an excellent choice for homeowners looking to efficiently care for their lawns. Its combination of performance, comfort, and durability makes it a reliable partner for all mowing tasks.