MAINTENANCE

V-BELTS

Check V-belts for deterioration and wear after every 50 hours of operation and replace if necessary. The belts are not adjustable. Replace belts if they begin to slip from wear. (See “TO REMOVE BELT COVER” in the Service and Adjustments section of this manual).

TheV-belts on your snow thrower are of special construction and should be replaced by original equipment manufacturer (OEM) belts available from your nearest dealer.Using other than OEM belts can cause personal injury or damage to the snow thrower.

AUGER GEAR CASE

The gear case was fi lled with lubricant to the proper level at the factory. The only time the lubricant needs attention is if service has been performed on the gear case.

If lubricant is required, use only Ronex ED #1 grease.

TRACTION DRIVE SYSTEM

DO NOT lubricate the drive components inside the snow thrower. The sprockets, hex shafts, drive disc and friction wheel require no lubrication. The bearings and bushings are lifetime lubricated and require no maintenance.

CAUTION: Any lubricating of the above compo- nents can cause contamination of the friction wheel and damage to the drive system of your snow thrower.

ENGINE

See engine manual.

LUBRICATION

Use only high quality detergent oil rated with API service classification SG–SL. Select the oil's SAE viscosity grade according to your expected operating temperature.

NOTE: Although multi-viscosity oils (5W30, 10W30 etc.) improve starting in cold weather, these multi-viscosity oils will result in increased oil consumption when used above 32°F. Check your engine oil level more frequently to avoid possible engine damage from running low on oil.

Change the oil after every 50 hours of operation or at least once a year if the snow thrower is not used for 50 hours in one year.

Check the crankcase oil level before starting the engine and after each fi ve (5) hours of continuous use. Tighten oil fi ll cap / dipstick securely each time you check the oil level.

TO CHANGE ENGINE OIL

Determine temperature range anticipated before next oil change. All oil must meet API service classifi cation SG–SL.

Be sure snow thrower is on level surface.

Oil will drain more freely when warm.

Catch oil in a suitable container.

NOTE: The left side wheel may be removed from snow thrower for easier access to the oil drain plug and place- ment of a suitable container. The unit tilted, resting on the frame with the left wheel removed, will help drain any oil trapped inside the engine. (See “TO REMOVE WHEELS” in the Service and Adjustments section of this manual).

1.Disconnect spark plug wire from spark plug and place wire where it cannot come in contact with plug.

2.Clean area around drain plug.

3.Remove drain plug and drain oil in a suitable container.

4.Install drain plug and tighten securely.

5.Wipe off any spilled oil from snow thrower and engine.

6.Install left wheel (if removed for draining oil). Be sure to install klick pin into proper hole in wheel axle (See “TO REMOVE WHEELS” in the Service and Adjustments section of this manual).

7.Remove oil fi ll cap/dipstick. Be careful not to allow dirt to enter the engine.

8.Refill engine with oil through oil dipstick tube. Pour slowly. Do not overfill. For approximate capacity see “PRODUCT SPECIFICATIONS”section of this manual.

9.Use gauge on oil fi ll cap/dipstick for checking level. Be sure dipstick cap is tightened securely for accurate reading. Keep oil at “FULL” line on dipstick.

10.Wipe off any spilled oil.

MUFFLER

Inspect and replace corroded muffler as it could create a fire hazard and/or damage.

SPARK PLUG

Replace spark plug at the beginning of each season or after every 100 hours of operation, whichever occurs fi rst. Spark plug type and gap setting are shown in the “PRODUCT SPECIFICATIONS” section of this manual.

CLEANING

IMPORTANT: For best performance, keep snow thrower housing free of any dirt or trash. Clean the outside of your snow thrower after each use.

WARNING: Disconnect spark plug wire from spark plug and place wire where it cannot come in contact with plug.

Keep finished surfaces/wheels free of gasoline, oil, etc.

We do not recommend using a garden hose to clean your snow thrower unless the electrical system, muffler and carburetor are covered to keep water out. Water in engine can result in shortened engine life.

15

Page 15
Image 15
Poulan PR524ESA owner manual Engine, Cleaning

PR524ESA specifications

The Poulan PR524ESA is a powerful and efficient snow thrower designed to tackle winter's toughest challenges. Known for its reliability and performance, this machine is ideal for homeowners who need to clear snow from driveways, sidewalks, and patios during heavy snowfalls. With an array of features and advanced technologies, the PR524ESA stands out in the competitive landscape of snow removal equipment.

One of the key features of the Poulan PR524ESA is its 208cc engine, which provides ample power to handle a variety of snow conditions, including heavy, wet, and packed snow. This four-cycle engine is designed for easy starting and requires no mixing of oil and fuel, simplifying maintenance for the user. The snow thrower is equipped with a 24-inch clearing width, allowing it to quickly and efficiently clear large areas of snow in fewer passes.

The PR524ESA features an adjustable augmented discharge chute, which allows users to direct the snow exactly where they want it to go. This is particularly useful in preventing snow from being thrown back onto already cleared pathways. The chute rotation is also adjustable from the operator's position, enhancing convenience and efficiency while working in harsh winter conditions.

Another notable characteristic of the Poulan PR524ESA is its 6-speed transmission, which includes 5 forward and 1 reverse speed. This gives operators greater control and flexibility when maneuvering the machine through varying snow depths and terrain types. Enhanced traction is further supported by the machine's large, rugged tires, which are designed to provide stability and grip on slippery surfaces.

The snow thrower is also equipped with integrated LED lights, ensuring that users can work effectively even in low-light conditions. This feature is particularly beneficial for those who need to clear snow early in the morning or late at night.

For added user comfort, the PR524ESA is designed with an ergonomically friendly handle that can be adjusted to different height settings. This allows users of varying statures to operate the snow thrower comfortably. Furthermore, the machine's compact design makes it relatively lightweight and easy to maneuver, enhancing its usability for users of all skill levels.

In summary, the Poulan PR524ESA is a versatile and user-friendly snow thrower that combines power, efficiency, and innovative features. Its reliable engine, adjustable chute, multiple speeds, and superior traction make it an excellent choice for anyone looking to keep their property clear of snow during the winter months. With its thoughtful design and practical features, the PR524ESA is well-equipped to handle whatever winter has in store.