OPERATION

PURGE TRANSMISSION

CAUTION: Never engage or disengage freewheel lever while the engine is

running.

To ensure proper operation and performance, it is recom- mended that the transmission be purged before operating tractor for the first time. This procedure will remove any trapped air inside the transmission which may have devel- oped during shipping of your tractor.

I M P O R T A N T : SHOULD YOUR TRANSMISSION REQUIRE REMOVAL FOR SERVICE OR REPLACEMENT, IT SHOULD BE PURGED AFTER REINSTALLATION BEFORE OPERATING THE TRACTOR.

•Place tractor safely on level surface with engine off and parking brake set.

•Disengage transmission by placing freewheel control in freewheeling position (See “TO TRANSPORT” in this section of manual).

•Sitting in the tractor seat, start engine. After the engine is running, move throttle control to slow position. Disengage parking brake

•Move motion control lever to full forward position and hold for five (5) seconds. Move lever to full reverse position and hold for five (5) seconds. Repeat this procedure three (3) times.

NOTE: During this procedure there will be no movement of drive wheels. The air is being removed from hydraulic drive system.

•Move motion control lever to neutral (N) position. Shut- off engine and set parking brake.

•Engage transmission by placing freewheel control in driving position (See “TO TRANSPORT” in this section of manual).

•Sitting in the tractor seat, start engine. After the engine is running, move throttle control to half (1/2) speed. Disengage parking brake.

•Slowly move motion control lever forward, after the tractor moves approximately five (5) feet, slowly move motion control lever to reverse position. After the tractor moves approximately five (5) feet return the motion control lever to the neutral (N) position. Repeat this procedure with the motion control lever three (3) times.

•Your tractor is now purged and now ready for normal operation.

MOWING TIPS

•Tire chains cannot be used when the mower housing is attached to tractor.

•Mower should be properly leveled for best mowing performance. See “TO LEVEL MOWER HOUSING” in the Service and Adjustments section of this manual.

•The left hand side of mower should be used for trimming.

•Drive so that clippings are discharged onto the area that has been cut. Have the cut area to the right of the tractor. This will result in a more even distribution of clippings and more uniform cutting.

•When mowing large areas, start by turning to the right so that clippings will discharge away from shrubs, fences, driveways, etc. After one or two rounds, mow in the opposite direction making left hand turns until finished (See Fig. 12).

•If grass is extremely tall, it should be mowed twice to reduce load and possible fire hazard from dried clip- pings. Make first cut relatively high; the second to the desired height.

•Do not mow grass when it is wet. Wet grass will plug mower and leave undesirable clumps. Allow grass to dry before mowing.

•Always operate engine at full throttle when mowing to assure better mowing performance and proper dis- charge of material. Regulate ground speed by selecting a low enough gear to give the mower cutting perfor- mance as well as the quality of cut desired.

•When operating attachments, select a ground speed that will suit the terrain and give best performance of the attachment being used.

FIG. 12

15

Page 14 Page 16
Page 15
Image 15
Poulan PRGT22H50D owner manual Mowing Tips, Purge Transmission
Page 14 Page 16

PRGT22H50D specifications

The Poulan PRGT22H50D is a standout in the realm of outdoor power equipment, specifically designed for homeowners seeking a reliable and efficient lawn tractor. Renowned for its robust features and user-friendly design, the PRGT22H50D delivers exceptional performance for lawn care enthusiasts.

One of the key features of this lawn tractor is its powerful 22-horsepower engine, providing ample horsepower to tackle even the toughest grass. This engine is engineered for durability and efficiency, allowing users to cover more ground at an impressive speed. The tractor is equipped with a 50-inch cutting deck, offering a wide cutting path that reduces the time spent mowing. The cutting deck design allows for superior grass dispersion, leaving a well-manicured lawn in its wake.

The PRGT22H50D incorporates a hydrostatic transmission, which provides a smooth and effortless driving experience. This type of transmission allows for seamless speed changes without the need for gear shifting, making it user-friendly for operators of all experience levels. The intuitive controls are strategically placed, allowing for easy maneuverability around obstacles, ensuring that every inch of grass is trimmed with precision.

Comfort is at the forefront of the design, featuring an adjustable high-back seat that promotes better posture and reduces fatigue during longer mowing sessions. Additionally, the lawn tractor includes a steering wheel that is ergonomically designed for ease of use, enhancing the overall comfort of the operator.

Another notable technology in the Poulan PRGT22H50D is its cutting height adjustment feature, which allows users to customize the height of their cut with ease. This versatility ensures that homeowners can achieve the ideal grass length for their specific lawn needs.

Safety features are also integrated into the design, with a built-in safety switch that helps prevent accidental starts when the operator is not in the seat. This attention to safety reflects Poulan’s commitment to ensuring a secure mowing experience.

Overall, the Poulan PRGT22H50D is an impressive lawn tractor that marries power, comfort, and cutting-edge technology, making it an ideal choice for any homeowner looking to maintain their lawn efficiently and effectively. Whether for small yards or larger properties, this tractor promises to deliver a reliable performance that meets the demands of modern lawn care.
Top Page Image Contents