Poulan 194915 See A, TO REMOVE THE SUPPORT ASSEMBLY See Fig, Bagger Support Assembly

Models: 194915 96072000100 QCT38-97

1 11

Page 5

1	BAGGER SUPPORT ASSEMBLY
	(See Fig. 1A)

1.Your tractor already has four (4) shoulder bolts installed on the rear drawbar, simply hang the support assembly on the bolts.

FIG. 1A

1.Pull outward on the stop bracket enough to allow support assembly to be lifted up and away from drawbar.

PULL OUT ON STOP BRACKET TO

REMOVE SUPPORT ASSEMBLY

02643

FIG. 1B

2	MOUNTING COVER ASSEMBLY TO
	SUPPORT ASSEMBLY (See Fig. 2)

NOTE: For ease of assembly, you may wish to obtain the assistance of another person for mounting cover assembly to tractor.

1.Position cover assembly on ground behind tractor as shown.

2.Lift and rotate cover to align cover bracket with support assembly.

3.Slide cover assembly down onto the support assembly.

COVER

ASSEMBLY

SUPPORT

ASSEMBLY

Image 5

Contents

Repair Parts Assembly Operation Customer ResponsibilitiesO WNER’S MANUAL Catalog No. QCT38-97 Model No 38 Inch Mower Grass CatcherSafe Operation Practices for Ride-OnMowers SAFETY RULESI. GENERAL OPERATION II. SLOPE OPERATIONV. SERVICE TABLE OF CONTENTSIV. TOWING SAFETY RULESUNPACKING INSTRUCTIONS CARTON CONTENTSKnow Your Grass Catcher PARTS IDENTIFICATIONTO REMOVE THE SUPPORT ASSEMBLY See Fig ASSEMBLYSUPPORT ASSEMBLY See Fig See Fig. 1A4 CONTAINER MOUNTING See Fig 3 CONTAINER ASSEMBLY See Fig6 UPPER CHUTE See Figs. 6A & 6B 5 ATTACH LOWER CHUTE See FigFig. 6A Fig. 6B 7 LEVEL MOWER DECKTIPS FOR IMPROVED BAGGING OPERATION OPERATIONGENERAL RECOMMENDATIONS CUSTOMER RESPONSIBILITIESSTORAGE BLADE CARERAMASSE-HERBE- NUMÉRO QCT38-9796072000100 REPAIR PARTS / PIÈCES DE RECHANGEGRASS CATCHER - NUMBER QCT38-9796072000100 GRASS CATCHER - NUMBER QCT38-9796072000100 REPAIR PARTS / PIÈCES DE RECHANGERAMASSE-HERBE- NUMÉRO QCT38-9796072000100 PART