ASSEMBLY
TO INSTALL DEPTH STAKE (See Fig. 4)
•Remove screw(s) securing depth stake to skid and discard the screw(s).
•Slide depth stake down into transport arm track, lin- ing up a hole in the depth stake with hole in transport arm.
•Install clevis pin and hairpin clip.
DEPTH |
STAKE |
CLEVIS PIN |
HAIRPIN CLIP |
Fig. 4
TILLING WIDTH
•Tilling width may be adjusted to better handle your tilling conditions (See “TINE ARRANGEMENT” in the Service and Adjustments section of this manual.)
TINE OPERATION
•Check tine operation before first use. (See “TINE OPERATION CHECK” in the Service and Adjustments section of this manual.)
5
