Manuals / Poulan / Lawn and Garden / Blower

Poulan WT200 LE instruction manual Storage

Models: WT200 LE

1 13
Download 13 pages 58.72 Kb
Page 10
Image 10

CLEAN AIR FILTER

Air Filter

Cover

REPLACE FUEL FILTER

To replace fuel filter, drain unit by running it dry of fuel, then remove fuel cap from tank. Pull filter from tank and remove it from the fuel line. Install new fuel filter on fuel line; reinstall parts.

Fuel Line

Fuel Filter

Air Filter

Screws

CHECK MUFFLER MOUNTING SCREWS

Once each year, ensure muffler mounting screws are secure and tightened properly to prevent damage.

Cleaning the air filter:

A dirty air filter decreases engine perform- ance and increases fuel consumption and harmful emissions. Always clean or replace air filter after every 5 hours of operation or yearly, whichever comes first.

1.Clean the cover and the area around it to keep debris from falling into the carburetor chamber when the cover is removed.

2.Remove parts as illustrated.

NOTE: Do not clean filter in gasoline or other flammable solvent. Doing so can create a fire hazard or produce harmful evaporative emis- sions.

3.Wash the filter in soap and water.

4.Allow filter to dry.

5.Apply a few drops of oil to the filter; squeeze filter to distribute oil.

6.Replace parts.

REPLACE SPARK PLUG

Replace spark plug each year to ensure the engine starts easier and runs better. Set spark plug gap at 0.025 inch (0.6 mm). Igni- tion timing is fixed, nonadjustable.

1.Twist, then pull off spark plug boot.

2.Remove spark plug from cylinder and dis- card.

3.Replace with Champion RCJ-6Y spark plug and tighten securely with a 3/4 inch (19 mm) socket wrench.

4.Reinstall the spark plug boot.

Mounting

Screw

Muffler Cover

Holes

 

Screws

1.Loosen and remove the 2 screws from the muffler cover.

2.Remove the muffler cover.

3.Tighten the 2 muffler mounting screws se- curely.

4.Reinstall muffler cover and 2 screws. Tighten securely.

CARBURETOR ADJUSTMENTS

There is no screw for idle adjustment on your blower. The throttle lever is used to control engine speed. The throttle lever can be placed in one of four positions: STOP, IDLE

or , FULL THROTTLE or

, and one

intermittent position. If your engine will not run properly or you require further assistance, contact an authorized service dealer or call 1--800--554--6723.

STORAGE

WARNING: Perform the following steps after each use:

SAllow engine to cool, and secure the unit before storing or transporting.

SStore unit and fuel in a well ventilated area where fuel vapors cannot reach sparks or open flames from water heaters, electric motors or switches, furnaces, etc.

SStore unit with all guards in place. Position unit so that any sharp object cannot acci- dentally cause injury.

SStore unit and fuel well out of the reach of children.

SEASONAL STORAGE

Prepare unit for storage at end of season or if it will not be used for 30 days or more.If your unit is to be stored for a period of time:

SClean the entire unit before lengthy stor- age. S Store in a clean dry area.

SLightly oil external metal surfaces.

-- 10 --

Page 9 Page 11
Page 10
Image 10
Poulan WT200 LE instruction manual Storage
Page 9 Page 11

WT200 LE specifications

The Poulan WT200 LE is a remarkable addition to the world of outdoor power equipment, designed specifically for those who seek reliability and efficiency in lawn maintenance. This lightweight yet powerful weed trimmer comes with a host of features that cater to both novice users and seasoned landscapers.

One of the standout characteristics of the WT200 LE is its robust 25cc two-cycle engine. This engine is engineered for optimal performance, delivering the power needed to tackle thick weeds and grass with ease. The engine's lightweight design allows for longer usage without causing fatigue, making it an ideal choice for extended trimming sessions.

Another notable feature is the Easy Start technology, which significantly reduces the effort needed to start the trimmer. With a simple pull of the starter cord, users can quickly get to work, eliminating the frustration often associated with starting gas-powered tools. This feature is particularly beneficial for those who may not have the physical strength to start heavier equipment.

The WT200 LE boasts a 17-inch cutting swath, allowing for efficient trimming over larger areas in less time. The dual-line cutting system not only enhances cutting performance but also provides a clean and precise finish. Users can easily replace the trimmer line thanks to the bump head design, which simplifies the process and ensures minimal downtime during operation.

For user comfort, the Poulan WT200 LE is designed with an ergonomic handle that offers a comfortable grip and better control. The adjustable handle ensures that users can achieve a personalized fit, which is especially useful for tackling different terrains and working at various angles.

In terms of safety, this trimmer features a protective guard that shields users from debris, providing an additional layer of security during operation. Moreover, its durable construction ensures that the trimmer can withstand the rigors of outdoor use, making it a dependable tool for years to come.

Overall, the Poulan WT200 LE is a well-rounded weed trimmer that combines power, ease of use, and safety features. Its efficient engine, user-friendly design, and effective cutting capabilities make it an excellent choice for anyone looking to maintain their lawn and garden effortlessly. Whether you’re a homeowner with a small yard or a professional landscaper managing larger properties, the WT200 LE is equipped to meet your trimming needs.