Power Acoustik PD-710T owner manual Symptom Cause Solution

TROUBLESHOOTING

SYMPTOM	CAUSE	SOLUTION
		IF THE POWER SUPPLY IS PROPERLY
	THE CAR IGNITION IS	CONNECTED TO THE CAR
NO POWER	NOT ON.	ACCESSORY SWITCH THE IGNITION KEY
		TO “ACC”.
	THE FUSE IS BLOWN.	REPLACE THE FUSE.
DISC CANNOT BE	PRESENCE OF DISC	REMOVE THE DISC IN THE PLAYER
LOADED.	INSIDE THE PLAYER	THEN PUT A NEW UPWARD.
	INSERTING THE DISC IN	INSERT THE COMPACT DISC WITH THE
		LABEL FACING
	UPSIDE DOWN.
		UPWARD.
DISC CANNOT BE	COMPACT DISC IS	CLEAN THE DISC OR TRY TO PLAY A
	EXTREMELY DIRTY OR	NEW ONE.
READ.
	DEFECTIVE.
	TEMPERATURE INSIDE	COOL OFF UNTIL THE AMBIENT
		TEMPERATURE RETURNS TO
	THE CAR IS TOO HIGH.
		NORMAL.
	VOLUME IS IN MINIMUM.	ADJUST VOLUME TO A DESIRED LEVEL.
NO SOUND
	WIRING IS NOT	CHECK WIRING CONNECTION.
	PROPERLY CONNECTED.
	THE BUILT-IN
	MICROCOMPUTER IS NOT
THE OPERATION	OPERATING PROPERLY	PRESS THE POWER BUTTON FOR
	DUE TO NOISE.	ABOUT 10 SECONDS
KEYS DO NOT WORK.
	FRONT PANEL IS NOT	TO RESET THE UNIT.
	PROPERLY FIX INTO ITS
	PLACE.
	THE INSTALLATION	ADJUST THE INSTALLATION ANGLE TO
	ANGLE IS MORE THAN 30	LESS THAN 30
SOUND SKIPS.	DEGREES.	DEGREES.
	THE DISC IS EXTREMELY	CLEAN THE COMPACT DISC/TRY TO
	DIRTY OR DEFECTIVE.	PLAY A NEW ONE.
THE RADIO DOES
NOT WORK, THE	THE ANTENNA CABLE IS	INSERT THE ANTENNA CABLE FIRMLY
RADIO STATION
	NOT CONNECTED THE	SELECT A STATION
AUTOMATIC
	SIGNALS ARE TOO WEAK.	MANUALLY.
SELECTION DOES
NOT WORK.

24