PowerBass specifications Ported, 3XLSUBWOOFER, 3XLSERIES

3XLSUBWOOFER

The 3XL range of subwoofers is innovative in that it is designed to work with the new generation Class "D" amplifiers. Class "D" amplifiers heat up the woofers voice coil two to three times hotter and faster than a conventional class A/B amplifier. This calls for Xtreme measures and special parts to classify these as a true "Class D Subwoofer." But hey, this is PowerBass. We have it under control.

Custom CNC Cast Aluminum Basket heavy duty design incorporating motor assembly cooling vents

Proprietary Non-pressed Paper Cone Body With Xpanded Zirconium Coated Poly Truss

is every thing that you need to produce the deepest and loudest bass known to man

Dual 1-ohm Voice Coils specifically built to handle all of your Class D needs

3" HD BASV Hybrid Voice Coil Formers for optimum performance and cooling

Industrial Assembly Glues are used to handle the Extreme heat that a Class D amplifier produces that would normally annihilate a common subwoofer

First, we use industrial assembly glues that handle this excessive heat that would normally tear a conventional speaker apart. Then there is perimeter venting to allow air movement over the voice coil built into our custom CNC cut, cast aluminum basket. The basket works as a strong support for the moving mass of the proprietary non-pressed paper cone body that holds the zirconium- coated poly truss cone that displays the raised PBX logo.

The 3XL woofers all feature 3" HD BASV voice coil formers that are anodized black to help dissipate heat. To allow full movement of the cone, we utilize an ultra high roll treated foam surround that increases the cone area for higher output along with linear cone stability throughout the subwoofers 3" of linear travel.

To make sure high voltages from the amplifier reach the speaker, we use Pro-Lock terminals and Xtra large motor assemblies to handle the high power these speakers are designed for.

3XL woofers are available in 10", 12", and 15" sizes, feature dual 1-ohm voice coils, and are designed to work best in ported enclosures for maximum SPL output.

CNC Billet Aluminum Trim Ring clamps surround to basket for increased durability

Ultra High Roll Treated Foam Surround that increases the cone area for higher output along with linear cone stability throughout the subwoofers 3 inches of linear travel

XTRA XTRA XTRA Large Motor Assemblies to handle the high voltage input into these beasts

Pro-lock Input Terminals to ensure optimal current transfer from the amplifier to the woofer

D E S I G N E D F O R

PORTED

ENCLOSURES

FOR MAXIMUM SPL OUTPUT

CLASS D SUBWOOFER

3XLSERIES		size	power handling	nominal	voice	frequency	sensitivity	motor	mounting
			(rms/peak)	impedance	coil size	response	(1w / 1m)	structure	depth
1O”, 12”, 15”	3XL-15D	15"	1000 / 2000 watts	Dual 1-ohm	3"	24Hz-400Hz	93 dB	542 oz	9.2"
	3XL-12D	12"	850/ 1700watts	Dual 1-ohm	3"	31Hz-450Hz	91 dB	542 oz	7.75"
	3XL-10D	10"	750/ 1500watts	Dual 1-ohm	3"	39Hz-500Hz	89 dB	443 oz	6.0"

04 05