PARTS DRAWING - ENGINE PANEL END ASSEMBLY
Torque to 8.5
Torque to 15
ITEM 37
NOTE: Seal all connections with gas tape. Use 2½ wraps minimum. Check all connections under pressure using a soap and water solution.
PARTS LIST
Item | Part No | Qty | Description | Item | Part No | Qty | Description |
1 | 1 | Insulation | 24 | 1 | Regulator assy, GX670 | ||
2 | N/A | 6 | Hose clamp, 23/32” I.D. |
|
|
| (PM401211) |
3 | 1 | Hose, high temp oil, 3/8” x 26.5” lg | or | 1 | Regulator assy, GX620 | ||
4 | N/A | 10 | Nut, |
|
|
| (PM400911) |
5 | 1 | GFCI Receptacle | 25 | N/A | 2 | Bolt, | |
6 | See page 42 | 1 | Control panel assy, CP200 | 26 | 0057079 | 1 | Oil cooler |
7 | N/A | 2 | Screw, | 27 | N/A | 4 | Bolt, |
8 | 4 | Spacer, .75 O.D. | 28 | 1 | Bracket, oil cooler | ||
9 | N/A | 4 | Screw, | 29 | Order | 1 | Hose, high temp oil, 3/8” x 3” lg |
10 | 1 | Control box frame | 30 | 1 | Tee, adapter oil temp | ||
11 | 1 | Panel, right hand (includes items | 31 | Order | 1 | Hose, high temp oil, 3/8” x 13” lg | |
|
|
| 1 & 22) | 32 | 1 | Switch, oil temp | |
12 | N/A | 2 | Screw, | 33 | 2 | Bushing, snap .875 ID | |
13 | 1 | Terminal block, ground lug | 34 | 1 | Rubber grommet | ||
14 | 1 | Terminal block | 35 | 1 | Wire harness, engine control | ||
15 | N/A | 1 | Screw, torx | 36 | 1 | Vapor hose assembly | |
16 | N/A | 2 | Screw, | 37 | 1 | Wire harness, terminal block | |
17 | N/A | 5 | Nut, |
|
|
| power |
|
|
| 15, 16 and 20) | 38 | 1 | Fuel grommet, .84 ID x 1.875 OD | |
18 | N/A | 1 | Rectifier shipped with engine | 39 | N/A | 1 | Nipple, 3” lg, 1/2 NPT |
|
|
| (Contact Honda Service Center) | 40 | 1 | Warning label | |
19 | N/A | 2 | Bolt, | 41 | 1 | Fuse holder | |
20 | N/A | 1 | Screw, | 42 | N/A | 1 | Fuse, 5A Type 3AG |
21 | 1 | Terminal block, 2 row 20A | 43 | 1 | Fuse label | ||
22 | 1 | Warning label |
|
|
|
| |
23 | N/A | 1 | Elbow, 1/2 NPT x 1/2 NPT | *N/A - | These are standard parts available at your local hardware . | ||
|
|
|
|
| store. |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
41 |