General Operating Instructions

The suggestions listed below are meant to give you a general idea of how your new Panel Saw is intended to be operated. No amount of instruction can replace good common sense and experience. Be sure the operators of your new Panel Saw are given enough time and material to become familiar with the general operating characteristics of this machine and have FULLY READ AND UNDERSTAND all general operating and safety instructions. The panel saw is prealigned at the factory. No assembly or adjustments are necessary.

NOTE: When your Panel Saw is located in position for operation, secure the machine in a manner that will prevent it from being tipped over.

Operating Tips

1.If you expect smooth, clean, chip-free cuts, follow these tips:

•Use industrial carbide saw blades which are SHARP. Dull blades or improperly sharpened blades will cause chipping, unclean cuts, chatter and will overload the saw motor.

•NOTE: ALWAYS USE A SHARP SAW BLADE. IF IN DOUBT REPLACE IT WITH A NEW BLADE.

•Feeding the material through the machine horizontally or moving the saw carriage through the material vertically MUST BE DONE SLOWLY, SMOOTHLY AND WHENEVER POSSIBLE WITHOUT STOPPING. Overfeeding will result in poor quality cuts, shorten the life of the carbide saw blades and overload the saw motor.

2.Caution must be used when setting material onto the material roller carriage. Heavy material MUST NOT BE DROPPED ONTO THE ROLLER CARRIAGE. Failure to follow this rule will ultimately cause the roller carriage to be pounded out of alignment.

3.For best results place material to be cut onto the Panel Saw with the back side facing the operator. This will provide the smoothest possible cut on the face side of the panel.

4.Panels being cut horizontally (ripping) must always be fed against the rotation of the saw blade.

5.Do not force the saw. It will perform better and can be more easily controlled if allowed to work at the rate for which it was designed.

6.If the saw is stopped in mid-cut, allow the blade to stop. Then back up the saw (if crosscutting) or the board (if ripping) and restart the saw to continue the cut.

7.Thin material, such as paneling, should be properly supported over its length to prevent binding in the blade.

8.Panel Saws are designed to cut large panels down to size. As the overall panel size becomes smaller and smaller other types of sawing machines can become more convenient and safer to use.

7

Page 6 Page 8
Page 7
Image 7
Powermatic 511 operating instructions General Operating Instructions, Operating Tips
Page 6 Page 8

511 specifications

The Powermatic 511 is a revered tool in the woodworking community, known for its solid construction and innovative features. Tailored for both hobbyists and professionals, it provides precision and efficiency to enhance woodworking projects.

At the heart of the Powermatic 511 is its robust design, which is built to withstand heavy use while maintaining optimal performance. The cast iron table provides excellent stability, minimizing vibration and ensuring that workpieces remain secure during operations. This solid foundation also contributes to a larger working surface, allowing users to tackle larger materials with ease.

One of the standout features of the Powermatic 511 is its powerful motor, which delivers consistent performance even under demanding conditions. This ensures that the machine can easily handle various types of wood, from softwoods to hardwoods, without compromising on speed or quality. The precision-ground table aids in achieving accurate cuts, offering users confidence in their results.

The machine incorporates advanced technologies, such as innovative dust collection systems that help maintain a clean work environment. This not only enhances the user's experience but also contributes to better health by reducing exposure to wood dust. The ease of dust extraction is a critical factor, especially in workshops where cleanliness is paramount.

Another notable characteristic of the Powermatic 511 is its user-friendly controls. The intuitive design allows for easy adjustments, ensuring that users can quickly switch between functions without extensive setup. This accessibility makes it an ideal choice for both beginners and seasoned woodworkers who value efficiency and simplicity.

Versatility is also a key aspect of the Powermatic 511. It supports a variety of tasks, making it suitable for different woodworking techniques. Whether it’s for shaping, sanding, or finishing, this tool adapts to multiple applications, reducing the need for additional equipment.

In summary, the Powermatic 511 is a powerful, efficient, and versatile tool that embodies the essence of quality woodworking. Its solid construction, advanced technologies, and user-friendly features make it a valuable addition to any workshop, helping craftsmen bring their creative visions to life with precision and ease. Investing in the Powermatic 511 means investing in tools that enhance your woodworking journey, ensuring that both novices and experts appreciate its capabilities.
Top Page Image Contents