Powermatic HPS67 operating instructions Introduction Specifications

Familiarize yourself with the following safety notices used in this manual:

This means that if precautions are not heeded, it may result in minor injury and/or possible machine damage.

This means that if precautions are not heeded, it may result in serious injury or possibly even death.

Introduction

This manual is provided by WMH Tool Group covering the safe operation and maintenance procedures for a Powermatic Model HPS67 Horizontal Panel Saw. This manual contains instructions on installation, safety precautions, general operating procedures, maintenance instructions and parts breakdown. This machine has been designed and constructed to provide years of trouble free operation if used in accordance with instructions set forth in this manual. If there are any questions or comments, please contact either your local supplier or WMH Tool Group. WMH Tool Group can also be reached at our web site: www.wmhtoolgroup.com.

Specifications

Model number (3 Phase model)	HPS67
Stock number (3 Phase model)	1791287
Model number (1 Phase model)	HPS67-1
Stock number (1 Phase model)	1791286
Main motor (3 Phase model)	TEFC, 5 HP, 3Ph, 230V
Main motor (1 Phase model)	TEFC, 3HP, 1Ph, 230V
Blade speed	4500 RPM
Blade size	12” (315 mm)
Arbor size	30 mm
Dado size (width x bore)	13/16” x 5/8”
Cutting depth	4” (100 mm)
Scoring motor	.3/4 HP
Scoring blade size	100 to 120 mm
Scoring blade arbor	20 mm
Scoring blade speed	6500 RPM
Sliding table carriage width	13” (330 mm)
Sliding table carriage stroke	67” (1700 mm)
Rip capacity	50” (1270 mm)
Main and scoring blade tilt	90 to 45 degrees
Main table size cast iron	37” x 20” (940 x 508 mm)
Right side extension table	31” x 18” (790 x 460 mm)
Rear extension table size	30” x 20” (760 x 500 mm)
Working table height	34” (860 mm)
Crosscut table size	42” x 20” (1060 x 510 mm)
Crosscut fence size with extension	101” (2565 mm)
Mitre Fence length with flip stop, clamp	31” (790 mm)
Overall size	122” x 54” x 93” (3100 x 1370 x 2360 mm)
Dust collection ports (two)	4” (100 mm)
Gross weight	1,100 lbs. (500 kg.)
Net weight	902 lbs. (410 kg.)

The above specifications were current at the time this manual was published, but because of our policy of continuous improvement, WMH Tool Group reserves the right to change specifications at any time and without prior notice, without incurring obligations.

6