Powermatic PM3000 manual Table Surface

The finely polished cast iron table (left) has standard sized miter slots precisely machined to be parallel to each other. We also include a full-featured miter gauge (right) with a fully adjustable, extruded aluminum fence.

Table Surface

The included extension table expands the total supported area (left) to 81”! We even bevel the back edge of the cast iron table (right) to eliminate the sharp corner other leave that can damage the wood or our fingers.

The 26”-wide (left-to-right) by 38”-deep primary cast iron table surface expands to 48”-wide when the included 11”-wide by 38”-deep cast iron extension wings are bolted up.

A tough, 38” by 33” laminate- covered extension table is also

included with the PM3000.

Added to the cast iron table surface overall support grows to a whopping 81”! The extension table includes a pair of steel support legs, equipped with fully adjustable rubber-tipped feet for added stability and support.

All cast iron surfaces are finely ground to insure a smooth, mar-free work surface that provides plenty of support for the

big jobs. We bevel the front and rear edge of the primary table and the extension wings to eliminate the sharp corner commonly found on many table saws where it meets the extension wings. Eliminating that corner may sound insignificant but it can easily gouge the wood or an errant hand.

The t-shaped 3/8”-deep by ¾”-wide miter slots are precision machined for consistent width, depth and parallelism. Standard sizing of the miter slots means they are compatible with all popular accessories.

Removing the 21 5/8”-long by 4 ¼”-wide throat plate provides expansive access for blade changing and working with our unique guard and splitter system. The standard and zero- clearance (accessory #1791080) POWERMATIC PM3000 throat plates are slotted for use with

the splitter installed for maximum performance and safety. Placement of the throat opening provides a full 15 ½” of table surface in front of the blade!

Our large throat plate (left) provide plenty of access for changing blades. The spring-

loaded balls (right) automatically keep the plates tightly in place.

POWERMATIC PM3000 standard throat plate