Installation

NOTE The UPS and EBMs MUST be installed at the bottom of the rack. If placed in a rack with existing equipment, the rack must be reconfigured to allow the UPS installation at the bottom of the rack.

NOTE The EBMs must be installed below the UPS as shown in Figure 2.

UPS

Optional

EBMs

Figure 2. Rack-Mount UPS with EBMs

5.Slide the EBM(s) into the rack.

6.Plug the EBM cable(s) into the battery connectors (see Figure 3). Up to four EBMs may be connected to the UPS.

UPS Battery

Connector

EBM Battery

EBM

Connectors

Cable

 

Figure 3. EBM Connections

Powerware® 5125 Two-in-One (1000–1500 VA) EBM User’s Guide : 164201439 A www.powerware.com

11