INSTALLATION

The Universal Serial Bus Module (USB module) is an X-SlotZconnectivity device that allows your UPS to communicate with a USB-compliant computer using LanSafe III power management software.

The following requirements must be met to install the USB module:

:A computer with a USB port

:LanSafe III (v4.15 or higher) power management software

:Microsoft Windows9 98 or 2000

:A Powerware9 UPS with an X-Slot such as the 9125

Inspecting the Equipment

If any equipment has been damaged during shipment, keep the shipping cartons and packing materials for the carrier or place of purchase and file a claim for shipping damage. If you discover damage after acceptance, file a claim for concealed damage.

To file a claim for shipping damage or concealed damage: 1) File with the carrier within 15 days of receipt of the equipment; 2) Send a copy of the damage claim within 15 days to your service representative.

Preparation

Before installing the USB module, complete the following list:

1.The UPS should be installed and operating in Normal mode (see the UPS User’s Guide for installation instructions).

2.If LanSafe III/FailSafe III is installed on your PC, uninstall the software.

NOTE FailSafe III does not support the X-Slot USB module and must be uninstalled to prevent installation and compatibility problems.

X-SlotZUSB Module User’s Guide : 05146515 A Uncontrolled Copy

5