Precision Power E.DZ owner manual Features, Control Panel Functions, Input Selection Switch

Features

20dB Headroom Switching Power Supply

Built-in Low Noise Bi-FET Op-Amps

2 Selectable Balanced RCA Inputs w/ Input Gain Front, Rear, & Subwoofer RCA Outputs

Four 18dB Front Bands; 125Hz, 500Hz, 3.5kHz, 12kHz

Three 18dB Rear Bands; 50Hz, 600Hz, 6.3kHz

Independent Subwoofer Level Control

Selectable Low-Pass Filter; 32Hz, 64Hz, 125Hz

Fader Control

Blue Backlit Control Knobs

Control Panel Functions

1.Input Selection Switch

The Input Selection Switch controls which of the two inputs the E.DZ processes. Press the switch in to accept the audio signal from your source unit through the CD input. Leave the switch out to accept and process the audio signal from a secondary source unit or auxiliary device through the AUX inputs.

2.Master Volume Control

The Mater Volume Control can be used asa primary or secondary volume control for your audio system. Generally, the source unit volume is set at a moderate level, then utilize the E.DZ's Master Volume Control. The ring around the Mater Volume Control is a fader, to increase or decrease the output levels between the front and rear outputs.

3.Subwoofer Level Control

The Subwoofer Level Control will increase or decrease the output level of the subwoofer pre-amp output in relation to the Master Volume Control.

4.Graphic Equalizer Controls

The Graphic Equalizer Controls will increase or decrease the level of its corresponding frequency, -18dB or +18dB. Turn the knob counter-clockwise (left) to decrease the level, clockwise (right) to increase the level.