CPD10WALLARM

Installation Instructions Visit Premier Mounts website at http://www.mounts.com Page 3

Parts ListInstallation Tools

The following tools may be required, dependent upon your particular installation. These tools are not provided by

Premier Mounts, but you can purchase them at your local hardware store.

Your Premier Mounts product is shipped with all proper installation hardware and components. Make sure that none

of these parts are missing and/or damaged before beginning installation. If there are parts missing and/or damaged,

please stop the installation and contact Premier Mounts (800) 368-9700.

Pencil

Phillips Tip

Screwdriver Tape Measure

Hand Held Drill Protective Eyewear

CPD10WALLARM Media Box Hardware
¼˝ Wood Drill Bit Electronic Stud Finder
Level
½˝ Socket and
Socket Wrench
2
1
Wall Plate
(Qty 1)
Arm Assembly
(Qty 1)
Adjustable Mounting Assembly
Pre-Assembled (Qty 1)
End Cover
(Qty 1)
Inner Slide Plate
(Qty 1)
Security Wrenches
M6 x 12mm Security
Head Screws (Qty 2)
M6 Set Screws
Security
(Qty 1)
Non-Security
(Qty 1)
M3
M5
¼˝ Nylon Spacer
(Qty 4)
M6 Flat Washer
(Qty 2)
External Slide Plate
(Qty 1)
M5 x 8mm Security Head
Screws (Qty 7)
M6 x 25mm Security
Head Screws (Qty 2)
5
16˝ x 3˝ Lag Bolts (Qty 4)
Square Washers
(Qty 4)
Extension Arm
(Qty 1)
Wall Plate Covers
(Qty 1)
Projector
Bracket (Qty 1)
M4 x 10mm Combo Screw
(Qty 4)
M4 x 10mm Lock-It™
Security Screw
(Qty 4)
Projector Bracket Hardware Hardware