10 | Basic Operation Instructions |
CANTILEVER LIFT OPERATION - REMOTE PLUS
To operate the cantilever lift:
1.Bring your power chair to a complete stop.
2.Press the mode key until the actuator indicator lights up. See figure 4.
3.Push the joystick forward to raise the lift. Pull the joystick back to lower the lift. Once the lift reaches its highest extension and the lift action stops, you should continue to hear and/or feel the lift motor running. This is because there is a clutch mechanism that allows the motor to continue running after the lift has reached its limit. This clutch works at both the top and bottom extensions of the lift. When you release the joystick, the lift motor will stop.
NOTE: Do not allow the motor to run more than a few seconds after the mechanism reaches the top or bottom limit.
4. Press the mode key again until the speed setting indicator lights up.
SPEED
SETTING INDICATOR
MODE
KEY
ACTUATOR INDICATOR
Figure 4. Remote Plus Controller
Cantilever Lift System | www.quantumrehab.com | RevA/Nov03 |
