V . Y O U R P M V
TILLER CONSOLE
The tiller console houses all of the controls needed to drive your PMV, including the speed adjustment dial, half/full speed switch, throttle control lever, battery condition meter, lights switch, hazard lights switch, turn signal buttons, status LED, and horn buttons. See figure 5.
WARNING! Do not expose the tiller console to moisture. In the event that the tiller console does become exposed to moisture, do not attempt to operate your PMV until the tiller console has dried thoroughly.
KEY SWITCH | BATTERY CONDITION METER |
| |
STATUS LED | SPEED ADJUSTMENT DIAL |
| |
LIGHTS SWITCH | POWER SEAT SWITCH (OPTIONAL) |
HORN BUTTON | HAZARD LIGHTS SWITCH |
HALF/FULL SPEED SWITCH | HORN BUTTON |
| |
| 400/181 |
TURN SIGNAL BUTTON | TURN SIGNAL BUTTON |
| |
| THROTTLE CONTROL LEVER |
| PUSH TO GO FORWARD |
| PUSH TO GO BACKWARD |
| PULL TO GO FORWARD |
| PULL TO GO BACKWARD |
Figure 5.Tiller Console
Battery Condition Meter
When the key is fully inserted and turned clockwise to power up your PMV, this meter indicates the approximate battery voltage strength. For further information on battery charging, see VI. “Batteries and Charging.”
Turn Signal Buttons
!Press the appropriate turn signal button once to activate it.
!Your PMV’s turn signals are timed to shut off automatically.
Hazard Lights Switch
This switch activates the
!Toggle the switch forward to turn on the flashers.
!Toggle the switch rearward to turn off the flashers.
Horn Button
Your PMV must be turned on for the horn to be operational.
!This button activates a warning horn.
!Do not hesitate to use the warning horn when doing so may prevent accident or injury.
Hurricane | www.pridemobility.com | 19 |