V . Y O U R P M V

Status LED

The status LED alerts you to electrical problems that may occur with the PMV. The LED remains constantly lit while your PMV is on. If your PMV develops an elec- trical problem, the status LED will flash a code. See X. “Basic Troubleshooting” for flash codes.

Tiller Console Fuses

These fuses help protect your PMV’s front lighting, turn sig- nals, and key switch console systems from receiving an over- load of electrical current. The fuses used in your PMV are the same type used in automobiles. See figure 5A. See XI. “Care and Maintenance” for fuse replacement.

5

B+

RIGHT RUNNING LIGHT

1

1

LEFT RUNNING LIGHT

1

LEFT TURN SIGNAL

1

RIGHT TURN SIGNAL

Figure 5A. Tiller Console Fuses

REAR SECTION

The batteries (not shown), the main circuit breaker (reset button), the manual freewheel lever, the anti-tip wheels, and the motor/transaxle assembly (not shown) are located on the rear section of your PMV. See figure 6.

MANUAL FREEWHEEL LEVER

MAIN CIRCUIT BREAKER

(RESET BUTTON)

ANTI-TIP WHEELS

Figure 6. Rear Section

Anti-Tip Wheels

The anti-tip wheels are an integral and important safety feature of your PMV. Do not, under any circumstances, remove the anti-tip wheels from your PMV.

WARNING! Do not remove the anti-tip wheels or modify your PMV in any way that is not authorized by Pride.

Batteries (Not Shown)

The batteries store electrical energy that powers your PMV. See VI. “Batteries and Charging ” for information on how to charge your PMV batteries.

Hurricane

www.pridemobility.com

21

Page 21
Image 21
Pride Mobility Hurricane PMV owner manual Status LED, Tiller Console Fuses, Anti-Tip Wheels, Batteries Not Shown