Tiller Angle Adjustment, Seat Rotation | Pride Mobility INFMANU1743

V I I I . C O M F O R T A D J U S T M E N T S

WARNING! Remove the key from the key switch before adjusting the tiller or the seat. Never attempt to adjust the tiller or the seat while the scooter is in motion.

TILLER ANGLE ADJUSTMENT

TILLER ADJUSTMENT LEVER

You can adjust the tiller to any number of positions be- tween the forward stop and the scooter deck.

1.Pull up on the tiller adjustment lever. See figure 13.

2.Move the tiller to a comfortable position.

3.Release the tiller adjustment lever. The tiller remains in that position.

NOTE: In order to lower the tiller to the scooter deck, you must first remove the seat and both batteries.

SEAT HEIGHT ADJUSTMENT

The seat can be repositioned to one of five different heights.

1.Remove the seat from your Maxima. See IX. “Dis- assembly andAssembly.”

2.Use the attached ring to pull and remove the ball de- tent pin from the seat post tower. See figure 14.

3.Raise or lower the seat pedestal to the desired height.

4.Hold the seat pedestal at that height and match up the holes in the seat pedestal and in the seat post tower.

5.Fully insert the ball detent pin.

6.Replace the seat.

FIGURE 13. TILLER ADJUSTMENT

SEAT PEDESTAL

BALL DETENT PIN

FIGURE 14. SEAT HEIGHT ADJUSTMENT

FRONT-TO-BACK SEAT ADJUSTMENT You can change the seat position forward or backward.

1.Remove the seat.

2.Use a 7/16-in. wrench to remove the seat position ad- justment screws. See figure 15.

3.Reposition the seat base on the seat and reinstall the seat position adjustment screws.

4.Reinstall the seat.

SEAT ROTATION

The seat lock lever locks the seat in one of four positions.

1.Push down on the seat lock lever to unlock the seat. See figure 15.

2.Rotate the seat to the desired position.

3.Release the seat lock lever to lock the seat securely in place.

ARMREST ADJUSTMENT KNOBS

SEAT

BASE

SEAT POSITION

ADJUSTMENT

SCREWS