I X . D I S A S S E M B LY A N D A S S E M B LY

No tools are required to disassemble or assemble your Maxima. Always disassemble or assemble your Maxima on a level, dry surface with sufficient room for you to work and move around your scooter. Keep in mind that the disassembled sections of the Maxima take up more floor space than the assembled Maxima.

DISASSEMBLY

You can disassemble the Maxima into five pieces: the seat, the main frame, the rear shroud, and the batteries. See IV. “Specifications” for individual component weights.

1.Place the manual freewheel lever in the drive (down) position.

2.Coil the cord and store it in the rear compartment.

3.Push down on the seat lock lever to unlock the seat and lift the seat up and off of the Maxima. See figure 18.

4.Gently lift the rear shroud off of the Maxima. See figure 19.

ASSEMBLY

1.Place the manual freewheel lever in the drive (down) position.

2.Gently place the rear shroud over the seat pedestal.

3.Slide the shroud down in place. Make sure that the rear plastic shroud does not make any contact with the rear wheels.

4.Carefully lift the seat and slide the small seat post (on the seat bottom) into the seat pedestal.

5.Rotate the seat until it locks into place.

FIGURE 18. SEAT REMOVAL

FIGURE 19. SHROUD REMOVAL

32

Maxima

Page 32
Image 32
Pride Mobility INFMANU1743 owner manual Disassembly, Assembly