Pride Mobility Jazzy 1104 owner manual Armrest Angle, Armrest Height Optional, Joystick Extension

V I . C O M F O R T A D J U S T M E N T S

ARMREST ANGLE

You can adjust the armrest angle to fit your specific needs.

To change the armrest angle:

1.Lift the armrest straight up so that it is perpendicular to the floor.

2.Use a 7/16-in. wrench to loosen the jam nut. See figure 15.

3.Use a 5/32-in. hex key to loosen the adjusting screw.

4.Turn the screw clockwise to lower the front of the armrest, or turn the screw counterclockwise to raise the front of the armrest.

5.Lock the adjusting screw into place by tightening the jam nut.

ARMREST HEIGHT (OPTIONAL)

Your Jazzy may be equipped with height-adjustable armrests.

LOOSEN THIS

SETSCREW

TO ADJUST

JOYSTICK

Figure 16. Joystick Extension

To change the armrest height:

1.Loosen the setscrew located underneath the armrest using a 3/16-in. hex wrench.

2.Remove the ball detent pin from the armrest.

3.Move the armrest up or down to the desired height.

4.Align the holes and reinsert the ball detent pin.

5.Retighten the setscrew.

JOYSTICK EXTENSION

The joystick control can easily slide out away from the armrest or in toward the armrest.

To extend the joystick:

1.Use a 3/16-in. hex wrench to loosen the setscrew. See figure 16.

2.Slide the joystick mounting bracket into or out of the armrest to the desired position.

3.Tighten the setscrew by turning it clockwise.

SWING-AWAY JOYSTICK

Your Jazzy may be equipped with a swing-away joystick. This option enables you to move the joystick from the front of the arm- rest to the side of the armrest, without disconnecting it. See fig- ures 17 and 18.

JOYSTICK POSITION

The standard joystick can be mounted to the left or right side of your Jazzy. Contact your authorized Pride provider.

Figure 17. Swing-away Joystick (Forward Position)

Figure 18. Swing-away Joystick (Retracted Position)

24 www.pridemobility.com Jazzy 1104 Rev F/Feb03