I I I . Y O U R P O W E R C H A I R

Manual Freewheel Levers

Your power chair has a manual freewheel lever on each motor. Manual freewheel levers enable you to disengage the drive motors from the gearboxes and maneuver the chair manually.

WARNING! Do not use the power chair while the drive motors are disengaged! Do not disengage the drive motors when the power chair is on an incline or decline, as the unit could roll on its own. Only engage the freewheel mode when on a level surface.

WARNING! It is important to remember that when your power chair is in freewheel mode, the braking system is disengaged.

To engage or disengage the drive motors:

1.Locate the lever on each side of the power base. See figure 5.

2.Pull both levers upward to engage the drive motors (drive mode). See figure 9.

3.Push both levers downward to disengage the drive motors (freewheel mode). See figure 10.

If a lever is difficult to move in either direction, slightly rock the power chair back and forth. The lever should then move to the desired position.

WARNING! Do not use the freewheel lever handles as tie-down points to secure this product.

FREEWHEELLEVER

FREEWHEELLEVER

Figure 9. Drive Mode (Drive Engaged)

Figure 10. Freewheel Mode (Drive Disengaged)

22

www.pridemobility.com

Jazzy Select Series

Page 22
Image 22
Pride Mobility Jazzy Select 6 manual Manual Freewheel Levers, To engage or disengage the drive motors