I V . A S S E M B L Y

INITIAL ASSEMBLY

Your power chair may require some assembly either before initial use or after transportation. It may also require disassembly to make some comfort adjustments.

NOTE: Any nylon insert lock nut removed during the disassembly or adjustment of the power chair must be replaced with a new nut. Nylon insert lock nuts should not be reused as it may cause damage to the nylon insert, resulting in a less secure fit. Replacement nylon insert lock nuts are available at local hardware stores or through your authorized Pride Provider.

Seat Installation

It may be necessary to install the seat either prior to initial operation or after transporting your power chair. Most seats are attached to the power base with the Universal Mounting System (UMS). The UMS consists of universal parts that may be attached to any medium-back or high-back seat, regardless of seat width or seat depth. The two main components are aluminum extrusions mounted to the seat base. These extrusions attach to a pair of trapeze bars that are mounted to the power base.

WARNING! Do not pick up the seat frame by the armrests. They are free to pivot, and you may lose control of the seat if they do so, resulting in personal injury or damage to the chair.

To install the seat:

1.Set the trapeze bars to the desired height. To change the trapeze bar height, see VI. “Comfort Adjustments.”

2.Tilt the seat back, and slide the rear extrusion onto the rear trapeze bar. See figure 10.

3.Lower the front extrusion onto the front trapeze bar until the seat locks into place.

4.Flip the seat latch safety down. See figure 11.

WARNING! Make sure the seat latch safety is flipped down before using your power chair.

5.Install the controller into one of the armrests. See VI. “Comfort Adjustments.”

6.Route the controller cable so that it cannot be pinched in the seat hinge and plug the cable into the controller connector on the electronics tray.

7.Secure the controller cable to the armrest receiver with one or more wire ties.

 

REAR

 

TRAPEZE BAR

 

REAR EXTRUSION

FRONT TRAPEZE BAR

FRONT EXTRUSION

Figure 10. Universal Mounting System

SEAT LATCH SAFETY

Figure 11. Seat Latch Safety

Jet 7

www.pridemobility.com

19

Page 18 Page 20
Page 19
Image 19
Pride Mobility Jet 7 owner manual A S S E M B L Y, Initial Assembly, Seat Installation, To install the seat
Page 18 Page 20

Jet 7 specifications

The Pride Mobility Jet 7 is a revolutionary powered mobility solution designed for users seeking both independence and convenience. This advanced mobility scooter is ideal for those with limited mobility, providing enhanced stability, comfort, and maneuverability. With its sleek design and high-performance features, the Jet 7 stands out in the market.

One of the standout features of the Jet 7 is its innovative XLR technology, which ensures a smooth and stable ride. This system incorporates an extended wheelbase and advanced suspension to provide superior stability, allowing users to navigate various terrains with ease. Whether it’s a bumpy sidewalk or a gravel path, the Jet 7 handles it seamlessly.

The Jet 7's sleek and stylish contemporary design allows users to travel in style. It is available in various attractive colors, making it a customizable choice for every individual. The scooter's lightweight frame and compact size make it easy to transport, whether it’s in the trunk of a car or on public transportation.

Comfort is a significant focus of the Jet 7. It features a fully adjustable and contoured seat with ample cushioning. The adjustable armrests provide additional support, enabling users to find the perfect position for their individual comfort. This ergonomic design reduces fatigue during longer rides and enhances the overall experience.

Equipped with powerful motors, the Jet 7 offers impressive speed and range. Users can travel distances up to 15 miles on a single charge, making it suitable for errands or longer outings. The easy-to-use joystick control provides intuitive steering, allowing users to navigate tight spaces with precision.

Safety is paramount in the design of the Jet 7. It is equipped with anti-tip wheels, ensuring stability on inclines and declines. The scooter also features bright LED lights for improved visibility during low-light conditions, keeping users safe while on the go.

Furthermore, the Jet 7 is designed with serviceability in mind. It includes modular components that are easy to access, making maintenance straightforward for both users and technicians. This attention to detail ensures longevity and reliability, making it a trusted choice for mobility needs.

In conclusion, the Pride Mobility Jet 7 combines advanced technology, comfort, safety, and style to deliver an exceptional mobility experience. It empowers users to regain their independence while providing the means to explore the world around them with confidence. Whether for daily errands or weekend adventures, the Jet 7 is a prime example of how mobility devices can enhance quality of life.
Top Page Image Contents