I X . C A R E A N D M A I N T E N A N C E

CARE AND MAINTENANCE

Your Jet 7 is a sophisticated power chair. Like any motorized vehicle, it requires routine maintenance checks. You can perform some of these checks, but others require assistance from your authorized Pride Provider. Preventive maintenance is very important. If you follow the maintenance checks in this section as scheduled, you can help ensure that your power chair gives you years of trouble-free operation. If you have any doubt as to your power chair’s care or operation, contact your authorized Pride Provider.

WARNING! Prevent injury. Do not service the power chair when the seat is occupied.

Your power chair, like most electrical equipment, is susceptible to damage from the elements.Avoid damp areas of any kind.

WARNING! Direct exposure to water or dampness could cause the power chair to malfunction electronically and mechanically. Water can cause electrical components to corrode and the chair’s frame to rust.

Should your power chair come in contact with water:

1.Dry your power chair as thoroughly as possible with a dry towel.

2.Allow your power chair to sit in a warm, dry place for 24 hours to allow unseen water to evaporate.

3.Check the joystick operation and the brakes before using your power chair again.

4.If any inconsistencies are found, take your power chair to an authorized service center.

Temperature

!Some of the parts of your power chair are susceptible to extreme changes in temperature. Always keep your power chair between the temperatures of 32° F and 122° F.

!In extremely cold temperatures, the batteries may freeze. The specific temperature at which they freeze depends on a number of factors such as battery charge, usage, and composition of the batteries (e.g., AGM or Gel-Cell).

!Temperatures above 122° F may cause your power chair to operate at a reduced speed. This is a safety feature built into the controller that helps prevent damage to the motor and other electrical components.

General Guidelines

!Avoid knocking or bumping your controller, especially the joystick.

!Avoid prolonged exposure of your power chair to extreme conditions such as heat, cold, or moisture.

!Keep the controller clean.

!Check all connectors to ensure that they are all tight and secured properly.

!Make sure the drive tires are inflated to 35 psi (2.4 bar) if equipped with pneumatic tires.

WARNING! Overinflating tires can cause them to explode and can result in personal injury.

WARNING! Do not use a high pressure hose to inflate your tires.

!Use a rubber conditioner on the tire sidewalls to help preserve them.

WARNING! Never use a rubber conditioner on the tread area of the tires; doing so may make the tires slippery and cause your power chair to skid.

!The body shroud has been sprayed with a clear sealant coating. You can apply a light coat of car wax to help it retain its high-gloss appearance.

!Check all electrical connections. Make sure they are tight and are not corroded. Batteries must sit flat within the battery area, with the battery terminals facing inward toward each other. Refer to the frame decal for the correct wiring layout.

Jet 7

www.pridemobility.com

35

Page 35
Image 35
Pride Mobility Jet 7 C a R E a N D M a I N T E N a N C E, Care and Maintenance, Temperature, General Guidelines

Jet 7 specifications

The Pride Mobility Jet 7 is a revolutionary powered mobility solution designed for users seeking both independence and convenience. This advanced mobility scooter is ideal for those with limited mobility, providing enhanced stability, comfort, and maneuverability. With its sleek design and high-performance features, the Jet 7 stands out in the market.

One of the standout features of the Jet 7 is its innovative XLR technology, which ensures a smooth and stable ride. This system incorporates an extended wheelbase and advanced suspension to provide superior stability, allowing users to navigate various terrains with ease. Whether it’s a bumpy sidewalk or a gravel path, the Jet 7 handles it seamlessly.

The Jet 7's sleek and stylish contemporary design allows users to travel in style. It is available in various attractive colors, making it a customizable choice for every individual. The scooter's lightweight frame and compact size make it easy to transport, whether it’s in the trunk of a car or on public transportation.

Comfort is a significant focus of the Jet 7. It features a fully adjustable and contoured seat with ample cushioning. The adjustable armrests provide additional support, enabling users to find the perfect position for their individual comfort. This ergonomic design reduces fatigue during longer rides and enhances the overall experience.

Equipped with powerful motors, the Jet 7 offers impressive speed and range. Users can travel distances up to 15 miles on a single charge, making it suitable for errands or longer outings. The easy-to-use joystick control provides intuitive steering, allowing users to navigate tight spaces with precision.

Safety is paramount in the design of the Jet 7. It is equipped with anti-tip wheels, ensuring stability on inclines and declines. The scooter also features bright LED lights for improved visibility during low-light conditions, keeping users safe while on the go.

Furthermore, the Jet 7 is designed with serviceability in mind. It includes modular components that are easy to access, making maintenance straightforward for both users and technicians. This attention to detail ensures longevity and reliability, making it a trusted choice for mobility needs.

In conclusion, the Pride Mobility Jet 7 combines advanced technology, comfort, safety, and style to deliver an exceptional mobility experience. It empowers users to regain their independence while providing the means to explore the world around them with confidence. Whether for daily errands or weekend adventures, the Jet 7 is a prime example of how mobility devices can enhance quality of life.