X I I . C A R E A N D M A I N T E N A N C E

Your Hurricane PMV was designed to require a minimal amount of care and maintenance. If you have any doubts about its care or operation, you may schedule inspection and maintenance at your authorized PMV provider.

The following areas require periodic inspection and/or care and maintenance:

TIRE PRESSURE

!For optimum scooter performance we recommend that the tire pressure be maintained at 30 psi.

WARNING! Do not exceed that pressure; overinflating a tire can cause it to explode.

TIRE CONDITION AND TREAD WEAR

Regularly inspect your Hurricane PMV’s tires for signs of wear. Use a rubber conditioner on your Hurricane PMV’s tires to help preserve them.

WARNING! Do not put rubber conditioner on tread area of tires; the tires may become dangerously slippery.

ABS PLASTIC SHROUDS

The shrouds have been sprayed with a clear sealant coating. They retain their high gloss with a light application of car wax.

OTHER EXPOSED SURFACES

!Bumpers and trim also benefit from an occasional application of rubber or vinyl conditioner. Do not use a rubber or vinyl conditioner on the Hurricane PMV’s floormat or vinyl seat; they may become dangerously slippery.

BATTERY TERMINAL CONNECTIONS

!Be sure they remain tight and are not corroded. Batteries must sit flat within the battery well area with the battery terminals facing the rear of the Hurricane PMV.

WIRING HARNESSES

!Check for insulation damage, especially the battery charger cord. If there is damage to this cord, you should have it repaired or replaced prior to next use.

NOTE: To avoid undue tension on the wiring harnesses when disassembling the front and rear halves of the Hurricane PMV, always disconnect the 9-pin front-to-rear harness and the two battery harnesses first.

SEAT POST

!We recommend you periodically clean dirt and grime from the detached post with any lubricant solution (such as WD40) and then wipe any excess buildup away with a soft cloth.

Hurricane PMV

29

Page 28 Page 30
Page 29
Image 29
Pride Mobility PMV-502, PMV-505, PMV-500, PMV-503, PMV-501 manual I . C a R E a N D M a I N T E N a N C E
Page 28 Page 30

PMV-505, PMV-502, PMV-501, PMV-500, PMV-503 specifications

Pride Mobility is renowned for its innovative and quality products in the mobility sector, with the PMV-500 series standing out for its blend of performance, comfort, and advanced technology. The PMV-503, PMV-500, PMV-501, PMV-502, and PMV-505 models are designed to cater to different user needs while maintaining high standards of reliability and ease of use.

The PMV-500 series includes several key features that enhance user experience. One of the most notable is the ergonomically designed seat, which provides exceptional comfort during extended use. The high-back seat comes with adjustable armrests and a reclining feature, allowing users to find the most comfortable position for their needs. This focus on user comfort confirms Pride Mobility’s commitment to supporting an active lifestyle.

These models also boast impressive maneuverability and portability. Their compact designs make them ideal for both indoor and outdoor use. Tight turning radiuses ensure easy navigation through small spaces, while durable tires provide traction and stability on various terrains. Additionally, the lightweight frames make these scooters easy to transport, with many models designed to fit comfortably in the trunk of a standard vehicle.

Power and performance are crucial to the PMV-500 series. Equipped with robust brushless motors, these models offer smooth acceleration and sufficient speed to keep up with daily activities. The models provide varying weight capacities, catering to a wide range of users, and are equipped with powerful batteries that facilitate long-distance travel on a single charge.

Safety is paramount in the design of the PMV-500 series. Features such as anti-tip wheels, programmable speed settings, and bright LED lighting enhance visibility and stability, ensuring secure rides day or night. The easy-to-reach control panel with intuitive joystick ensures that users can operate their scooters confidently.

In terms of technology, the PMV-500 models are equipped with advanced dashboard displays, showcasing essential information such as battery life, speed, and distance traveled. This integration of technology allows users to have complete control and awareness of their ride.

In summary, the Pride Mobility PMV-503, PMV-500, PMV-501, PMV-502, and PMV-505 series offer a blend of comfort, safety, and advanced technology. With features tailored to user needs and performance specifications that ensure reliability, these mobility scooters provide an ideal solution for enhancing mobility and independence. Whether for everyday use or adventurous outings, the PMV-500 series continues to set a benchmark in the mobility sector.
Top Page Image Contents