X I . B A S I C T R O U B L E S H O O T I N G

Any electromechanical device occasionally requires maintenance, but be assured that many common problems are usually solved easily with a bit of common sense. Ask yourself what works and what doesn’t. Try each and every control on the Hurricane PMV to see if your problem follows any pattern.

Ask yourself , “Is the whole Hurricane PMV dead or just some of its functions?”

What if all systems on theHurricane PMV appear to be dead?

1.Make sure the key is fully inserted.

2.Check the battery condition meter to verify that your batteries are fully charged.

3.The control console assembly is equipped with a timer that shuts the unit off whenever it has been idle for several minutes without any operation. Pull out the key, wait a few seconds, and reinsert the key for normal operation.

4.Check the main circuit breaker. Push it in to reset the main circuit breaker located on the controller (in the rear section of the Hurricane PMV).

5.Make sure both battery harnesses are firmly connected to the electronics module connectors and at the battery terminals.

6.Verify that the front console control harness is firmly plugged into the rear connector mounted on the front side of the electronic control module.

7.If none of these steps work, call your local authorized service center.

What if the unit is dead and the brakes are released?

The Hurricane PMV was probably left in the manual freewheel mode. When the manual freewheel lever is pulled up, the brakes are disengaged and all the power to the motor is cut. Push the lever down for normal operation.

What if the main circuit breaker (located on the utility tray) repeatedly trips?

1.Charge your batteries more frequently.

2.If this continues, have both batteries load tested by your authorized service center.

3.Check that foreign objects, such as rope or wire, have not become jammed in the wheel assemblies.

4.Make sure you do not exceed the maximum weight capacity of the PMV.

What if the console meter dips far downward when pressing the throttle control lever and the motor surges and/or hesitates?

1.Fully charge your batteries.

2.Have your dealer perform a load test of both batteries.

3.Have the two motor brushes cleaned and replaced if necessary.

If you experience any problems with your Hurricane PMV that you are not able to solve, immediately contact your provider for proper information, maintenance, and service.

28

Hurricane PMV

Page 27 Page 29
Page 28
Image 28
Pride Mobility PMV-501, PMV-505 manual B a S I C Troubleshooting, What if all systems on theHurricane PMV appear to be dead?
Page 27 Page 29

PMV-505, PMV-502, PMV-501, PMV-500, PMV-503 specifications

Pride Mobility is renowned for its innovative and quality products in the mobility sector, with the PMV-500 series standing out for its blend of performance, comfort, and advanced technology. The PMV-503, PMV-500, PMV-501, PMV-502, and PMV-505 models are designed to cater to different user needs while maintaining high standards of reliability and ease of use.

The PMV-500 series includes several key features that enhance user experience. One of the most notable is the ergonomically designed seat, which provides exceptional comfort during extended use. The high-back seat comes with adjustable armrests and a reclining feature, allowing users to find the most comfortable position for their needs. This focus on user comfort confirms Pride Mobility’s commitment to supporting an active lifestyle.

These models also boast impressive maneuverability and portability. Their compact designs make them ideal for both indoor and outdoor use. Tight turning radiuses ensure easy navigation through small spaces, while durable tires provide traction and stability on various terrains. Additionally, the lightweight frames make these scooters easy to transport, with many models designed to fit comfortably in the trunk of a standard vehicle.

Power and performance are crucial to the PMV-500 series. Equipped with robust brushless motors, these models offer smooth acceleration and sufficient speed to keep up with daily activities. The models provide varying weight capacities, catering to a wide range of users, and are equipped with powerful batteries that facilitate long-distance travel on a single charge.

Safety is paramount in the design of the PMV-500 series. Features such as anti-tip wheels, programmable speed settings, and bright LED lighting enhance visibility and stability, ensuring secure rides day or night. The easy-to-reach control panel with intuitive joystick ensures that users can operate their scooters confidently.

In terms of technology, the PMV-500 models are equipped with advanced dashboard displays, showcasing essential information such as battery life, speed, and distance traveled. This integration of technology allows users to have complete control and awareness of their ride.

In summary, the Pride Mobility PMV-503, PMV-500, PMV-501, PMV-502, and PMV-505 series offer a blend of comfort, safety, and advanced technology. With features tailored to user needs and performance specifications that ensure reliability, these mobility scooters provide an ideal solution for enhancing mobility and independence. Whether for everyday use or adventurous outings, the PMV-500 series continues to set a benchmark in the mobility sector.
Top Page Image Contents