V I I . C A R E A N D M A I N T E N A N C E

To replace the batteries:

1.Turn off the power to the controller.

2.Make sure that the power chair is in drive mode. See III. “Your Power Chair.”

3.Pull to remove the rear shroud. See figure 23.

4.Push down on the disconnect release button and disconnect the rear battery harness from the power base. See figure 23.

5.Unfasten the battery strap from around the rear battery.

6.Slide the rear battery out.

7.Push down on the disconnect release button and disconnect the front battery harness from the power base. See figure 23.

8.Remove the front battery.

9.Remove the battery harness from each battery.

10.Install a battery harness onto each new battery according to the battery wiring diagram. See figure 23. Make sure that you connect the red wire to the positive (+) battery terminal and the black wire to the negative (-) battery terminal for each battery.

WARNING! Make sure you tighten the fasteners so that the connections are secure.

11.Place the batteries back into the power base.

12.Fasten the battery strap around the rear battery.

13.Connect each battery harness to its mating plug on the power base.

14.Reinstall the rear shroud.

15.Charge the batteries. See VI. “Batteries and Charging.”

When to See Your Quantum Rehab Provider for Service

The following symptoms could indicate a serious problem with your power chair. If necessary, contact your Quantum Rehab Provider. When calling, have the model number, serial number, nature of the problem, and the error code if available.

Motor noise Frayed harnesses

Cracked or broken connectors Uneven wear on any of the tires Jerky motion

Pulling to one side

Bent or broken wheel assemblies Does not power up

Powers up, but does not move

Corrective Maintenance

If the battery condition meter does not light up when you turn on the power:

Check the harness connections. Make sure they are tight.

Check the circuit breaker. Reset it if necessary.

Check the battery connections.

If the above conditions prove normal, you can load test the batteries with a battery load tester. These testers are available at automotive parts stores. Disconnect both batteries before load testing and follow the directions that come with the load tester. If either one of the batteries fails the load test, replace both of them. If your power chair still does not power up, contact your Quantum Rehab Provider.

38

www.pridemobility.com

Quantum 614 Series

Page 37 Page 39
Page 38
Image 38
Pride Mobility 614 3MP, Quantum 614, 614 3S To replace the batteries, When to See Your Quantum Rehab Provider for Service
Page 37 Page 39

614 3MP, Quantum 614, 614 3S, 614 3SP specifications

Pride Mobility is a leading brand in the mobility scooter and power wheelchair market, and its Quantum 614 series continues this tradition of innovation and quality. The Quantum 614 3MP, 614 3S, 614, and 614 3SP models are designed to meet the needs of individuals requiring mobility assistance without compromising on independence or comfort.

The Quantum 614 3MP is equipped with advanced power tilt and recline functions, allowing users to adjust their seating position easily for maximum comfort throughout the day. With a weight capacity of up to 450 lbs, it provides an accommodating experience for users of varying sizes. The spacious seating and ergonomic design also enhance user experience, significantly reducing fatigue during extended use.

The Quantum 614 3S model offers similar features, but with a focus on additional stability and safety. This model incorporates a robust suspension system that allows for smoother rides even over uneven terrains. The 3S version is perfect for individuals who require a reliable mobility solution for both indoor and outdoor use. The enhanced traction and stability systems ensure users feel secure, whether navigating a shopping mall or rural pathways.

The standard Quantum 614 model retains many features from its variants while providing a simpler option for users who may not require additional functionalities. It still boasts a powerful motor and battery system that allows it to reach high speeds while maintaining efficiency and reliability. The user-friendly joystick control offers precision steering, making navigation hassle-free.

For those seeking further advancements, the Quantum 614 3SP model adds more technology-driven capabilities. It is integrated with advanced electronics and power seating options that enable users to adjust their position with ease. Additionally, the 614 3SP comes equipped with LED lighting that enhances visibility and safety during nighttime use.

All models in the Quantum 614 series feature a sleek, modern design, with durable construction that ensures longevity. The customizable color options allow users to personalize their mobility device to reflect their style. With a range of advanced features and varying models, the Quantum 614 series by Pride Mobility is designed to cater to the diverse needs of mobility-challenged individuals, promoting independence and comfort in daily life.
Top Page Image Contents