V I I I . C O M F O R T A D J U S T M E N T S
TILLER ANGLE ADJUSTMENT
WARNING! Remove the key from the key switch before adjusting the tiller or the seat. Never attempt to adjust the tiller or the seat while the scooter is in motion.
Your scooter is equipped with an adjustable pivoting tiller.
1.Turn the tiller adjustment knob counterclockwise to loosen the tiller. See figure 16.
2.Move the tiller to a comfortable position.
3.Turn the tiller adjustment knob clockwise to secure the tiller in position.
NOTE: In order to lower the tiller to the scooter deck, you must first remove the seat. Remove the seat by pulling it straight up and off of the scooter.
SEAT HEIGHT ADJUSTMENT
The seat can be repositioned to one of two different heights. See figure 17.
1.Remove the seat from your scooter.
2.Use the attached ring to pull and remove the de- tent pin from the lower seat post.
3.Raise or lower the upper seat post to the desired seat height.
4.While holding the upper seat post at that height, match up the adjustment holes in the upper and lower seat post.
5.Fully insert the detent pin.
6.Replace the seat.
SEAT ROTATION
The seat lock lever is located at the bottom right side of the seat. The lever allows you to lock the seat into one of four positions: forward, rearward, left, and right.
1.Pull up on the seat lock lever to unlock the seat.
2.Rotate the seat to the desired position.
3.Release the seat lock lever to lock the seat se- curely in place.
TILLER
ADJUSTMENT
KNOB
Figure 16. Tiller Adjustment
| UPPER SEAT |
ADJUSTMENT HOLES | POST |
| |
DETENT PIN |
|
LOWER |
|
SEATPOST |
|
Figure 17. Seat Height Adjustment
30 | www.pridemobility.com | Sonic |
