The Control Panel

On/Off

1

2 3

1Detergent dispenser drawer

2 Mains-on light

This light comes on when the “On/Off” button is pressed, and goes out when it is pressed again.

3 “On/Off” button

Press this button to switch the machine on. Press it again to switch the machine off.

Programme Option buttons

Depending on the programme, different functions can be combined. These must be selected after choosing the desired programme and before pressing the “Start/Pause” button.

When these buttons are pressed, the corresponding pilot lights come on. When they are pressed again, the pilot lights go out.

If an incorrect option is selected, the corresponding pilot light flashes for a few seconds.

4 Spin” button

Press this button to reduce the maximum speed of the final speed proposed by the machine for the selected programme or to select position “Rinse Hold” . The light corresponding to the selected option illuminates.

The following speeds are available for the different fabrics:

Cottons, linen: 500/700/900 max 1200 r.p.m.

Synthetics and Handwash (wool): 500/700 max 900 r.p.m.

Delicates and Mini: 500 max 700 r.p.m.

1200

900

 

 

 

 

Spin

Mini

90° 90°Eco

Cottons

700

 

 

 

 

Drain

 

60°Eco

500

 

 

 

 

Softener

 

 

40°Eco

 

 

 

 

 

Rinse

 

 

40°

Spin

Quick

Extra

Easy

Start/

Soak 30°

 

 

30°

Prewash Rinse

Iron

Pause

 

 

 

 

 

 

 

Cold

 

 

Cold

 

 

 

 

 

Handwash- 30°

 

60°

 

 

 

 

 

 

60°Eco

 

 

 

 

 

40°

 

 

 

 

 

 

 

Cold 30° 40°

 

 

 

 

 

 

30°

40°

Synthetics

 

 

 

 

 

Delicates

 

 

 

 

 

 

 

 

 

 

 

LPR 712

4 5 6 7 8

9 10

11

Rinse Hol

When Rinse Hold option is selected, the last rinse water is not emptied out, to prevent the fabrics from creasing. When the programme has finished, the door is locked, the light of the “Start/Pause” button goes off, the pilot lights “End” and “Rinse Hold” in the programme progress display are alight to indicate that the water must be emptied out.

There are two methods of draining the water from the machine.

Method 1: Drain the water only, no spin:

Turn selector dial to "o" position.

Select the programme “Drain”.

The water will be emptied out without spinning. Method 2: Drain and then spin the laundry:

Turn selector dial to oposition.

Select programme Spin”.

Select the required spin speed (see 4 spin speed button)

Press Start/Pause button

The water will empty out and then the laundry will be spun at the selected spin speed.

Attention! Before selecting programmes “Drain” or “Spin”, the selector dial has to be positioned on o(cancelling).

5 “Quick” button

This option can be used for lightly soiled Cotton, Synthetic or delicate items that have been used or worn for a short time.

This option is not available with the Handwash

(Wool) programme, the Energy saving programmes (90° Eco, 60° Eco and 40° Eco) and Mini.

6

Page 6
Image 6
Prima LPR 712 manual Control Panel, 1Detergent dispenser drawer Mains-on light, On/Off button, Spin button, Quick button