www.ultramagicard.com
Prima Cleaning Instructions
Before carrying out cleaning of the Prima printer, a cleaning kit will need to be ordered. This can be ordered through your dealer network.
ACleaning Pads for the rubber rollers.
BCleaning swab for the thermal print head.
CPack of 10 sticky cleaning cards for the printer rollers.
DCleaning card with the backing partially removed.
ROLLERS.
•Dirty rollers are the major cause of jamming cards in the printer.
•It is recommended to clean the rollers after printing 1000 cards – dependant upon environment.
•You must also allow the printer to cool before the cleaning cycle.
1.Remove both ribbon cassettes.
2.Switch the printer on, it will initialise however the “No Cassette” error will show.
3.At this point press the “MENU” button three times to show the cleaning menu.
4.Press “Enter” to open the cleaning menu. On a standard printer you will only have the option to clean the rollers; on a Mag/Chip printer you will have the option to clean the Magnetic encoding head also.
5.Press “Enter” on the printer menu, this will start the rollers turning.
NOTE: | AT THIS POINT IF THE PRINTER IS |
| TOO HOT YOU WILL BE |
| PROMPTED “HR IS TOO HOT” |
| (HEATED ROLLER IS TOO HOT). |
