
The Control Panel
A U T O W A S H
1 0 0 0
PROGRAMMES
QUICK RINSE HALF
ON/OFF WASH HOLD LOAD
LPR 710
1 | 2 | 3 4 | 5 6 | 7 |
1 Programme guide
2 Mains-on light
This light illuminates when the machine starts working and goes out when the ON/OFF button is released.
3 ON-OFF button 
By depressing this button the machine starts operating. When depressed again, the machine stops.
The push button is provided with a
4 QUICK WASH button 
By depressing this button on programmes A, B, C, D and G the wash time is reduced.
This is only suitable for garments which are lightly soiled.
5 RINSE HOLD button 
Press this button to make the machine stop with water in the drum after the cotton, synthetic or delicate wash cycles.
This prevents any creasing which may occur if the clothes are left damp in the drum. When it is convenient for you to empty the machine, simply press this button again so that the machine can proceed to drain and spin, or select the drain programme “P”.
If this button is not activated, the washing programmes will end with a spin.
6 HALF LOAD button 
Select this button to reduce water consumption on the rinse cycle when washing a smaller load of cottons or linens (maximum load size = 2.25 kg).
7 Programme selector dial
Push the dial to pop it out. Turn the dial clockwise to select the required wash programme.
Before setting the dial to any position the machine must be switched off by depressing the ON/OFF button again.
6