PrimaLuna©ProLogue Eight
7
General Operation
Turning the unit on/off
Turn on the Power Switch (POWER) on the left side, the unit will rst close the disc tray,
the display will show PRIMALUNA PL8 CDP, and the unit will perform a self-check. When the
display shows READING, the self-check has been completed and the unit is ready to read
the disc.
Playback
Press the Stop/Open Button on the front panel or the remote control to open the disc •
tray. Place the compact disc in the disc tray label-side up.
Press the Stop/Open Button on the front panel or the remote control to close the tray.•
•
Once the display indicates the number of tracks on the disc and the total time of the •
disc, press the Play/Pause Button on the front panel or the remote control to start
playback. If the disc tray is open when you press the Play/Pause Button, it will close
automatically and start playing.
Normally, the disc will start playing with track 1. However, you can select a different track
by pressing the Skip Buttons.
Track Search
During playback or in STOP mode, you can select a track to play by pressing the •
Skip Buttons.
Press the Forward Skip Button to advance to the beginning of the next track. If the •
current track is the last one, pressing this button will return the player to track 1.
Press the Backward Skip Button to reverse to the beginning of the previous track. If •
the current track is the rst one, press this button to reverse to the beginning of the
last track.
Pause
During playback, press the Play/Pause Button on the front panel or the remote control to
temporarily pause playback.
Press the Play/Pause Button again to resume playback
When the player is in PAUSE mode, the disc motor is still spinning. Since leaving the player
in this condition can shorten the lifetime of the motor, do not leave the player in PAUSE
mode for a long period of time.
In PAUSE mode, after advancing or reversing to the next track, the unit will still be paused.