Primera Technology 810 manual How Does the LX-Rewinder Work?

	Fon:	+49(0)611	92777	- 0
Mainzer Straße 131	Fax:	+49(0)611	92777	- 50
D 65187 Wiesbaden/Germany	email:sales@primera-europe.eu

LX-REWINDER for LX800/810 printer series

All-in-One rewind and unwind the label rolls

How Does the LX-Rewinder Work?

The LX-Rewinder is used in conjunction with Primera’s LX Series Label Printers to rewind printed labels back onto a roll. The “rewind” and “unwind” functions allow for a flawless operation with no additional cables required.

A roller guide arm detects the tension of label materials and starts a linear movement onto a rewinding roll. Should the tension be too tight, the guide will automatically rise allowing the rewinding roll to unwind so that the ideal tension can again be established. The LX-Rewinder also has an adjustable speed control which regulates the rewinding speed.

This will ensure that the print quality is not compromised by too much tension or incorrect speed.

In addition, the LX-Rewinder supports the “out of label” error. In this case, the guide arm falls to the bottom and

an acoustic signal sounds an alarm informing the user that rewinding has stopped.

Testing the Functionality of the LX-Rewinder

1.Connect the supply cable to the printer.

2.Switch the unit on and you will hear a beeping sound signaling that the unit is “out of labels”.

3.Lift the arm manually and you will notice that the Rewinder starts to move faster as the arm is lifted higher. The movement slows down as you lower the arm.

4.While testing the arm functionality you can also regulate the speed with the speed knob.

ON-OFF switch

speed control

power plug

18 VAC

2A fuse

w w w . p r i m e r a . c o m •

•w w w . p r i m e r a - e u r o p e . e u