Primera Technology BravoTM Index, B. Hardware Setup, Applying Power, Loading Media Discs

TOC INDEX

B. HARDWARE SETUP

Bravo connects to your Mac in just 5 easy steps. To connect your new disc publisher, please do the following:

Be sure you have removed the packing tape and cardboard insert prior to applying power.

Step 1: Applying Power

•Locate the power adapter supplied with your Publisher.

•Place one end of the adapter cord into the power port on the rear panel of the Publisher.

•Unit will initialize for 30 seconds or so.

Step 2: Loading Media (Discs)

NOTE: Your Publisher can print directly onto virtually any brand of printable-surface CD/DVD media. Since different brands of discs have different printable coatings, however, you may need to adjust the printer driver settings to accommodate your specific brand of CD/DVD media. Refer to Section 3 for further printer driver information.

Due to the wide variety of printable-surface CD/DVD media, you may find that certain brands of discs provide higher print quality than others. For maximum print quality, use CD/DVD media authorized by Primera.

Software and Hardware Set-Up 9