TOC 
The Laminator is positioned at the front left corner of the Duplicator. The optional Duplicator XL/Pro Laminator Stand is needed for both of these configurations. The stand is shown here:
STAND-ALONE MODE
The Automated Stand-Alone Mode allows you to connect the Laminator to the Duplicator XL or DuplicatorPro without connecting either the Duplicator or Laminator to a PC. This mode is used when you simply want to load the Duplicator with 100 printed discs and laminate them unattended. The Laminator will take the place of a printer in this configuration. Stand-Alone Mode is set up as follows:
1.Laminate a few discs in Stand-Alone configuration as described in the Laminator User's Manual to ensure the Laminator is configured to properly laminate your discs.
2.If present, remove the Printer Stand and Printer from the back of the Duplicator.
3.Make sure both the Power and Auxiliary Control Cable are connected to the Duplicator as shown:
8 Optical Disc Laminator Connectivity Guide
