INSTALLATION
1.After you have removed the mixer from the carton, inspect the unit for signs of damage. If there is damage to the unit:
λNotify carrier within 24 hours after delivery.
λSave carton and packing materials for inspection purposes.
λContact the Prince Castle Customer Sales Department at
2.Verify that all parts have been received.
CAUTION: The stainless steel spindle is machined. Ground care must be taken so it will not be damaged. Severe impact and undue pressure can put the spindle out of alignment and balance, making it inoper- able at high speeds. When lifting or mov- ing the mixer, do not touch the spindle.
3.Using the four holes on the side of the stainless- steel mixer housing as a template, mark the surface where mixer is to be mounted. Use the mounting hardware provided. See figure 1.
figure 1
4. Plug mixer into a
OPERATION
Your mixer is equipped with an automatic starting switch which starts the motor when a drink container is placed in position. The motor continues to operate as long as there is a container on the machine, the automatic switch shuts off the motor when the con- tainer is removed.
IMPORTANT: If the container is removed rapidly from the spindle when the drink is finished, very little of the drink will adhere to the agitators. See figure 2.
figure 2
HARD ICE CREAM:
1.Place the ice cream on one side of the mixing cup so that the spindle is not thrust into the hard ice cream.
IMPORTANT: Never force the spindle into the hard ice cream. This may cause ice cream to accumulate at the bottom of the mixing cup, preventing thorough mixing.
2.Place the mixing cup on the mixer and press against starting switch clip.
SOFT ICE CREAM:
1.Pour the proper amount of syrup and soft serve into the mixing cup.
2.Place the mixing cup on the mixer and press cup against starting switch clip.
IMPORTANT: To properly mix a mild drink requires time. Let the drink run on the mixer until it has be- come creamy and attained an overrun. This time element depends upon the temperature and compo- nents of the drink and can be determined by trial. Generally, thinner drinks are mixed at low speed and thicker drinks are mixed at higher speeds.
CLEANING
To clean, simply wipe mixer head with a damp cloth.
CAUTION: Care must be taken to prevent water and cleaning material from enter- ing the motor housing. This will cause damage to the electrical system.
IMPORTANT: See separate instruction sheet, Sanitizing Instructions for the Model SMW Mixer.
PROPER MAINTENANCE
Unless the mixer is damaged, it requires very little maintenance other than cleaning. The spindle shaft rotates on sealed ball bearings which do not require lubrication. If the spindle slows down during opera- tion then the brushes must be replaced.
2
