840118300 ENv04.qxd 12/17/03 2:01 PM Page 4
Parts and Features
1. Brew Basket
2. Reservoir
3. Brew Basket Well
4.
5.Carafe
6. Water Window
NOTE: Picture references major components for all coffeemakers covered by these instructions.
To Make Coffee
1.Before first use, clean coffeemaker by following steps listed in “To Clean the Inside of the Coffeemaker.” Use either clear water or vinegar. If clock model, read Digital Clock Timer section.
2.Place brew basket in brew basket well. Insert thumb handle in the left opening. Ensure brew basket is fully seated.
3.Place a #4 cone paper filter in brew basket.
4.For each cup of coffee being made, place one level scoop (provided with coffeemaker) or one level tablespoon of coffee into filter. Close lid, making sure it is fully closed.
To Make Coffee (cont.)
5.Fill carafe with the desired amount of cold tap water.
6.Pour water from carafe into reservoir.
NOTE: Do not fill past the 12 cup mark (54 ounces).
7.Place carafe, with carafe lid attached, on
8.Close lid. Press firmly on lid to ensure that it is completely closed.
9.For switch models: Turn switch to ON. A lighted switch indicates coffeemaker is on. Turn switch to OFF and unplug when finished.
For clock models: press ON/OFF 
button to start.
An illuminated red light to the right of the ON/OFF 
button indicates coffeemaker is on. Press ON/OFF 
again to turn off and unplug when finished.
NOTE: For clock models, see “To Set and Use Automatic Brew” on page 7.
Features
Pause ’N Serve
This feature allows you to pour a cup of coffee before the entire brew cycle has completed. By removing the carafe, the flow of coffee will temporarily stop. The flow of coffee will resume when carafe is returned to the
Do not remove carafe more than 20 seconds or brew basket may overflow.
Brew Strength Selector (on selected models)
This feature allows you to control the strength/flavor of the coffee. To select from mild to strong flavor, rotate the Brew Strength Selector Knob, located on top of the coffeemaker, to desired strength.
4 | 5 |
