ISO/DIN MOUNTING
If you own a Japanese vehicle, you can use the mounting screw holes on the side of the CD/MP3 player to attach to the factory mounting brackets.
!Detach the removable face of the MP6600 by depressing the release button
!Remove the outside trim ring by gently pulling at both outer edges (See page 10).
!Remove the side retaining plates by unscrewing the two phillips screws.
!Remove the brackets from the factory radio, paying close attention to their position.
!Attach the brackets to the MP6600 in the same position as the factory radio.
!After attaching the wiring harness to the factory wiring loom (See Electrical and Signal Connections) and plugging the antenna lead , place the CD/MP3 player in the dash aligning the mounting hole of the CD/MP3 player with the factory mounting brackets. Secure the radio to the brackets using factory mounting screws.
FACTORY SIDE RETAINING PLATES,
STYLE AND SHAPE WILL VARY
FOR EACH VEHICLE
Once the CD/MP3 player is secured, insert the face plate with the right side of the face plate angled in first then gently push the left side of face plate until it snaps completely in place.
9
