INSTALLATION
POWER SUPPLY:
Open the battery compartment (bottomside) and install 4 pcs 1.5V AAA batteries. Mind the polarity.
Attention: always disconnect the telephone form the telephone out- let when batteries are to be installed or replaced.
TELEPHONECORD & HANDSETCORD:
1.connect the supplied handsetcord between the handset and base
2.connect the telephonecord to the bottomside of the telephone; push the connectors till you hear a click
3.plug the telephone plug into your telephone outlet
PABX:
In case the
WALL MOUNT:
1.drill two holes in the wall with a distance of 9 cm and insert two screws. Let the heads of the screws stick out a few millimeters of the wall
2.click the wall mount plate to the bottomside of the
3.remove the handsetholder, rotate it 180° and replace it. This holder will hold the handset when wall mounted
4.hang the unit on the wall and fixate the telephone wire by means of
Once the power adaptor is plugged into a 230V mains outlet or the batteries have been installed, the telephone is ready for use.
PROGRAMMING
Make sure that during the programming, the telephone must be connected to your telephoneline.
DISPLAY LANGUAGE:
The several messages can come on the display with different lan- guages. Follow these instructions to select the required language:
1.leave the handset on the cradle
2.press and hold the button 
3.press and hold the button 
4.press 
, the display shows "NEDERLAND" (or another language), now release the buttons
5.use buttons 
and 
to select another language
6.press 
to store the selected language
24
