8
6. With the help of a second person, carefully tip
the treadmill onto its right side. Partially fold the
Frame (56) so the treadmill is more stable; do
not fully fold the Frame yet.
Removeand discard the two indicated bolts (B)
and theshipping bracket (C).
Attacha Base Foot (81) to the Base (83) in the
locationshown with a #8 x 1" Tek Screw (2) and
a BaseFoot Spacer (13). Then, attach another
BaseFoot (81) with only a #8 x 1" Tek Screw (2).
Attach a Wheel (84) with the 3/8" x 2" Bolt (4)
and the 3/8" Nut (8) that you removed in step 1.
Do not overtighten the Nut; the Wheel must
turn freely.
6
83
84
56
4
8
81
2
B
C
81
13
2
5. Hold a Bolt Spacer (80) inside the lower end of
the Right Upright (78). Insert a 3/8" x 4 1/2" Bolt
(6) with a 3/8" Star Washer (9) into the Right
Upright and the Bolt Spacer. Repeat this step
with a second Bolt Spacer (80), 3/8" x 4 1/2"
Bolt (6), and 3/8" Star Washer (9). Then, set
the Right Upright in the Right Upright Spacer
(79). Be careful not to pinch the Upright Wire
(38).
Partially tighten the 3/8" x 4 1/2" Bolts (6); do
not fully tighten the Bolts yet.
79
78
80
6
5
38
9
4. Identify the Right Upright (78) and the Right
Upright Spacer (79), which are marked with
“Right” stickers.
Insert the Upright Wire (38) through the Right
Upright Spacer (79) as shown. Set the Right
Upright Spacer on the Base (83). Be careful
not to pinch the Upright Wire.
Have a second person hold the Right Upright
(78) near the Base (83). Seethe insetdrawing.
Tie the long tie in the Right Upright securely
around the end of the Upright Wire (38). Then,
pull the other end of the long tie until the Upright
Wire is routed completely through the Right
Upright.
83
38
78
79
38
4
Long
Tie
Long Tie
78
38