ProForm 400C user manual Make sure that the power cord is unplugged, Upright Bolts yet

1. Make sure that the power cord is unplugged.	1
Identify the Right Upright (39), which has a
square hole in the location shown.
Orient the Right Upright (39) and the Base (37)
as shown. Attach the Right Upright to the Base
with two Upright Bolts (4) and two Upright Star
Washers (6); do not tighten the Upright Bolts
yet.	39
	37
			6
			4
	Square Hole
2. Orient the Left Upright (38) as shown, and attach	2
it to the Base (37) with two Upright Bolts (4) and
	Latch
two Upright Star Washers (6); do not tighten
	Holes
the Upright Bolts yet.
	37
	38
			6
		6	4
3. Turn the Base (37) over, and set it near the front	3
of the treadmill as shown.
	39
Locate the wire in the Right Upright (39). See the	Wire
	37
inset drawing. Secure the wire to the connector		Wire
on the Upright Wire (69). Then, insert the connec-	69
tor on the Upright Wire into the square hole in
the Right Upright.
			69
	7