ProForm 831.21521.1 user manual Assembly

ASSEMBLY

Assembly requires two persons, Place all parts of the exercise cycle in a cleared area and remove the packing materials. Do not dispose of the packing materials until assembly is completed.

in addition to the included tools, assembly requires a Phillips screwdriver G_ ======_and two

adjustable wrenches _,

Use the drawings below to identify the small parts used for assembly. The number in parentheses below each drawing is the key number of the part, from the PART LIST on page 14. The number following the key number is the quantity needed for assembly. Note: Some small parts may have been pre-assembJed, if a part is not in the parts bag, check to see if it has been pre-assembled.If a part is missing, call toIFfree 1-888-533-1333.

M6 Washer	M8 Split	M8 Nylon	M10	Nylon
(55)-8	Washer (59)-5	Locknut (60)-4	Locknut	(63)-4

M4 x 16mm		M6 x 38mm Button	M6 x 42mm Button
Round	Head	Bolt (48)-4	Screw (49)-4
Screw	(52)-4

M8 x 25mm Button	M8 x 70mm Button
Screw (33)-3	Bolt (54)-2

MIO x 75mm Carriage Bolt (51)-4