8.

.

Connect the Upper Wire Harness (36) to the

Lower

8

Wire Harness (65). Attach the Upright (13) to the

 

Frame (1) with three M8 x 25mm Button Screws (33)

 

and three M8

Split Washers (59). Be careful

to avoid

 

pinching the

Wire Harnesses.

 

13

 

 

 

36

65

Identify the Left Pedal (24), which is marked with an

 

"L." Using an adjustable wrench, firmly tighten the

 

Left Pedal counterclockwise into the left arm of the

 

Crank (31). Tighten the Right Pedal (not shown) clock-

31

wise into the right arm of the Crank. important:

25

Tighten both Pedals as firmly as possible. After

using the exercise cycle for one week, retighten the Pedals. For best performance, the Pedals must be kept tightened.

Adjust the left Pedal Strap (25) to the desired position, and press the end of the Pedal Strap onto the tab on the Left Pedal (24). Adjust the right Pedal Strap (not

shown) in the same way.

24

Tab

10.Make sure that all parts are properly tightened before you use the exercise cycle. Note: After assembly is completed, some extra parts may be left over. Place a mat beneath the exercise cycle to protect the floor.

7

Page 7
Image 7
ProForm 831.21521.1 user manual Pinching, Tighten both Pedals as firmly as possible. After